So here is everything you'll need:
1) Tagger dart
2) Hot glue gun with glue stick
3) Scissors
4) Fishing weight (Optional)
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01732.jpg)
First: cut off the tip
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01734.jpg)
Then, you'll need to plug up the foam part with hot glue so air doesn't just go right through. You could also add a weight now, but I can't find mine right now.
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01735.jpg)
Then, cut the tip in half like this:
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01737.jpg)
next cut the rubber out from between the velcro
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01739.jpg)
you might need to trim the velcro to fir on the foam. now put a couple drops of hot glue on the top
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01741.jpg)
add the velcro
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01743.jpg)
And finally, the finished product
![Posted Image](http://i269.photobucket.com/albums/jj54/bobafett109/DSC01742.jpg)
Now you have a dart that will (I hope) work consistently in the longshot, and stick to tagger vests.
Edit: Sorry for the blurry pics, my camera was burning through batteries, and I wanted to get all my pictures before they ran out.
Edited by bobafett109, 23 December 2007 - 02:42 PM.