29 replies to this topic

[Jaffe]

I'm intrested in how your workspace looks.
Mine workspace is a bit small, there are standing some bike's and some machinery.
My worksbench is made from 2" thick wood, it's constructed to the wall. Next to the workbench is a closet with a lock on it, in the closet are my chemicals(I'm a pyrotechnican ). At the other side of the room are the machines: a drillpres, a table saw and a homemade lathe. I'm having alot of tools like screwdrivers, clamps, hammers also called the basic stuf . I also have a dremel and electric handdrill, for the dremel I have almost everything that costed me about €120.
GR.Tom

[ultra920]

Erm, um nobody laugh.

• table attached to wall.
• Cheepoxy(Liquid cement and Elmers)
• Screwdriver
• Sand paper(120 and 50 aluminum)
• pencil
• rubber bands
• some spare springs
• spare foam(various sizes)
• weights
• halfway decent foam for darts
• lamp
• scotch tape
• packing tape

All I can remember.

Edited by ultra920, 12 November 2007 - 09:07 AM.

[Ubermensch]

Mine is a table with old audio thingy converted into cabinets. Next to it is my computer. There is also a boombox. (There's nothin' like modding to the beat).

One cabinet has darts
One has parts
One has dart blanks.
Hot glue gun
Plasti-dip
3/8" FBR
1/2" FBR
5/8" FBR
Steel BB's
Gun shelf
Elmer's glue
Duct tape
E-tape
Screwdrivers
Rubber bands
Hacksaw
File
I also have a 5' length of PEX tubing for barrels.

All hacksawing, etc. is done outside on a picnic table.

Edited by Ubermensch, 12 November 2007 - 05:34 PM.

[Militant Panda]

My "shelf" or "table" is a piece of newspaper lying on he floor of my room surrounded by a toolkit (filled with screwdrivers of different sizes, exacto knife, and some other things), sandpaper, a hack saw, pipe-cutters, a Tupperware container filled with a tube of epoxy, Elmer's, scissors, e-tape, ruler, and a black sharpie. In a plastic bag I have my new glue gun and an unopened bag of FBR. Currently sitting on top of my toolkit are Ziplock bags filled with spare parts from blasters. A bag of industrial strength rubber-bands sitting next to my TV, and in my corner I have a long pipe of CPVC nestled between two guitars

[PC III]

My Workplace is a small-ish area in my room. It has a large industrial workbench in front, with a chest full of spare parts underneath. Behind that in a steel shelf with six racks, one for large primaries, one for small ones, one for sidearm, one for NERF stuffige (clips, scopes, safety glasses, ect.), one for broken-in the presses of being modded, and one for... well I haven’t decided yet.

On the desk are hand tools, screwdrivers, saws, and knifes, ect. Power tools, rotary tool, two different glue guns (one for darts, one for guns) and stuff like paper towels a cup full of water, for dart making, FBR, and wates. There is probably more but I’m too lazy to look.

Between the bench and the shelf in my favorite steel-leather spiny chair.



P.C.

[TED]

Here's my mess of a workplace:

[BustaNinja]

I have an old computer desk with a pull out keyboard slot for my pistols (it is like a mini armory) and a TV were the monitor sits (Nothin makes me want to mod like old episodes of Mythbusters). Then I have my work table, which is a ols coffe table with weights for darts. I have randow roles of tape lying around everywere. A knife set. More knives. I big fold out table (currently folded, normally coverd with gun parts). Pipe of all kinds on the floor next to me. 4 boxes all filled with about 100 of each dart type. Paint cans and glue guns, epoxy and jb weld. Then I have my work bench. 4-5 drills with about 5 sets of bits. Dremel and all attachments, Vibro-sander (It vibrates to sand. its really odd) circular sander, Sandpaper, more paint. Pliers, wire, 3 hacksaws, a bunch of hammers, wire cutters and the center piece of my workbench, My really old, really nice vice.

[CaptainSlug]

Any tool work happens in the workroom in the basement.


But most gun dissection and assembly takes place on my bedroom floor.

[karpenter63]

I work on my ping-pong table with some newspaper spread over top of it.

When I need to use power tools, I move into my dad's workroom that has about 4 square feet of walking space. It gets pretty cramped in there, but I make do.

[dadude778]

In my basement I have a table which I put my guns on and a place where I put frequently used tools( screwdriver, hot glue gun, e-tape, pliers, ect) I steal all the other tools I use from my dad and I work on my basement floor. I also have 30-40 feet of assorted pvc and cpvc. Finally I have my fbr which is straightening in my cpvc.

Edited by dadude778, 11 November 2007 - 08:35 PM.

[shadowkid33]

Mine is the desk in my room.

Here's my main desk.



Here are my guns...in the bins under my desk.



Here is my windowsill. That thing on the windowsill is supposed to be a platform for my cat to sleep on, but he never uses it.


And here is my toolbox, which goes with me to every Nerf War I go to.

Edited by shadowkid33, 11 November 2007 - 08:58 PM.

[Dayko]

I do everything in my bedroom, except for gooping I do that outside, cause man does that stuff stink!!

[Blasphemy]

I used to work in my basement or bedroom, but now I'll be using a new workplace:





It's an 8' by 12' shed my father and I built, we are almost finished with it. I also intend to use it as a base of operations.

[Ubermensch]

*manly* I also always have a red Mickey Mouse pillowcase ready to straighten stefans. *manly*

[hierarchy]

I have my workplace in my bedroom.


The bottem white drawer has darts. The seconed drawer has gun parts such as screws and springs. And the top drawer has modding materials such as hot glue and e-tape. I also have two hot glue guns. One for normnal hot glue and the other is for sparkely silver hot glue for my darts. And that blue square with the nerf symbol is my dart holder for when the hot glue dries.


On the right side of the table is a wooden box. In wich I keep me rapid-fire guns.


On the left side is a simmilar box that I keep my foam for darts in and my nerf scorebordes.


Underneath my table is my pistol drawer. Also under that is my hammer and hacksaw. Also ontop of the pistol drawer is my huge pump that one day I want to put on a gun.


And finaly in my closet is were I keep the rest of my guns. And the chair that I sit in when modding. And when I'm done that shower curtain covers all of the closet.

[Foam Shooter]

My workspace is pretty well organized:


In the drawers of my desk I have
- drawing papers and graph papers for designing
- foam
- a few miter boxes and hacksaws
Next to the desk is tower of drawers with:
- various tools
- unfinished pistols
- internals


Behind the bookshelf is:
- pipe insulation
- 5/8" FBR
- 1/2" PVC
- 3/4" PVC
- 1" PVC
- 1 1/4" PVC


And finally in the closet is:
- lots and lots of nerf guns
- empty tool boxes
- barrels for guns
- darts
- barrels
- a scale
- screwdrivers
- a full tool box
- spare parts
- parts from my current homemades (GNS and homemade airgun)
- adhesives
- behind the adhesives is a box full of airsoft parts and extra plastics
- in the red basket are some bigger guns like the longshot and magstrike and such
- homemade arrow materials
- 3" PVC and 2" PVC
- more darts and arrows

Edited by Foam_Shooter, 19 November 2007 - 09:37 PM.

[nerfsharpie6]

I have no pics for my workspace, but I'll describe.
Garage:
8 foot workbench covered in various materials that a garage collects.
Vice grip
Air Compressor
Cabinet with lock. This holds the paint and gas for lawnmower.
Three rolling drawers with various junk and glue.
5 foot tall tool box with screwdrivers, saws, gloves, razors, etc.
Cabinets with food and other junk
Open shelves hold my dremmel which I need more parts for.
I'm pretty sparse on materials since I don't really mod that much, but it gets the job done when I feel like it.

[C-A 99]

My "workshop" is also my family room. Right now it's a jumbled stack of:

-PVC and CPVC
-Random cardboard boxes and pieces
-2 open soakers that were never repaired
-A Mav and RF20 under repair
-Random tools (drill, dremel, PVC cutter, hacksaw, stuff like that)
-A homemade soaker and pneumatic water balloon launcher
-Gorilla glue and epoxy
-Some random other stuff

Later on, I'll have to get some FBR and more CPVC.

Edited by C-A_99, 23 November 2007 - 12:51 PM.

[saxynerfer]

This is my workplace in the garage. It's like a permananet card table, a radio, a fan, and all my tools and materials. Home sweet home.



P.S. It is NEVER this clean...

[keef]

Well, theres my room...
The bed in my room



The floor in my room.



And my desk.




And the kitchen table.




All are in a clean state at the moment.

[Scotch]

I have a huge work-space ( It used to be my Dad's Wood-shop but now we share it and converted half of it into a rumpus-room).



Some of my guns, that are 100% finished (I know there are not a lot)



Parts and other non-Nerf stuff



Unfinished guns and parts



4 boxes full of mostly unfinished guns and parts



Stefan making and unscrewing area(the only organized area).



Tool and power tools underneath. To the right is a wall of paints(not shown in picture) Would you believe it's 9:30 at night in this picture?

[Ubermensch]

Hey! I have the same glue gun as you!

[saxynerfer]

Hey! I have the same glue gun too!

[Forsaken angel24]

Doomsayer

At the very end of the video is a trippy look at my old workspace before I moved.

I will get some good photos or video soon of my new work space.