#1
Posted 11 November 2007 - 09:38 AM
Mine workspace is a bit small, there are standing some bike's and some machinery.
My worksbench is made from 2" thick wood, it's constructed to the wall. Next to the workbench is a closet with a lock on it, in the closet are my chemicals(I'm a pyrotechnican ). At the other side of the room are the machines: a drillpres, a table saw and a homemade lathe. I'm having alot of tools like screwdrivers, clamps, hammers also called the basic stuf . I also have a dremel and electric handdrill, for the dremel I have almost everything that costed me about €120.
GR.Tom
#2
Posted 11 November 2007 - 10:51 AM
- table attached to wall.
- Cheepoxy(Liquid cement and Elmers)
- Screwdriver
- Sand paper(120 and 50 aluminum)
- pencil
- rubber bands
- some spare springs
- spare foam(various sizes)
- weights
- halfway decent foam for darts
- lamp
- scotch tape
- packing tape
Edited by ultra920, 12 November 2007 - 09:07 AM.
PSN: ultra920 MGO:ultra920 shoot me an MGO invite if you play
#3
Posted 11 November 2007 - 11:11 AM
One cabinet has darts
One has parts
One has dart blanks.
Hot glue gun
Plasti-dip
3/8" FBR
1/2" FBR
5/8" FBR
Steel BB's
Gun shelf
Elmer's glue
Duct tape
E-tape
Screwdrivers
Rubber bands
Hacksaw
File
I also have a 5' length of PEX tubing for barrels.
All hacksawing, etc. is done outside on a picnic table.
Edited by Ubermensch, 12 November 2007 - 05:34 PM.
Nerf Rocket Air Launcher
#4
Posted 11 November 2007 - 11:17 AM
#5
Posted 11 November 2007 - 12:03 PM
On the desk are hand tools, screwdrivers, saws, and knifes, ect. Power tools, rotary tool, two different glue guns (one for darts, one for guns) and stuff like paper towels a cup full of water, for dart making, FBR, and wates. There is probably more but I’m too lazy to look.
Between the bench and the shelf in my favorite steel-leather spiny chair.
P.C.
Don't want to shove balls in tight spaces. Trust me, bad idea.
For sale: Vintage WWII French rifles. Dropped once, never fired.
#6
Posted 11 November 2007 - 01:00 PM
#7
Posted 11 November 2007 - 02:26 PM
Venom: Haven't we all?
#8
Posted 11 November 2007 - 04:10 PM
But most gun dissection and assembly takes place on my bedroom floor.
#9
Posted 11 November 2007 - 06:13 PM
When I need to use power tools, I move into my dad's workroom that has about 4 square feet of walking space. It gets pretty cramped in there, but I make do.
#10
Posted 11 November 2007 - 08:34 PM
Edited by dadude778, 11 November 2007 - 08:35 PM.
Finish those other mods so I have something else to read on here.
Now have a coke and a smile and shut the fuck up.
- Forsaken_angel24
#11
Posted 11 November 2007 - 08:35 PM
Here's my main desk.
Here are my guns...in the bins under my desk.
Here is my windowsill. That thing on the windowsill is supposed to be a platform for my cat to sleep on, but he never uses it.
And here is my toolbox, which goes with me to every Nerf War I go to.
Edited by shadowkid33, 11 November 2007 - 08:58 PM.
1. Go to the search button in the right corner of the screen
2. Click
3. Search double longshot clip.
#12
Posted 12 November 2007 - 12:56 AM
< One foot in death...The other in life. >
#13
Posted 12 November 2007 - 04:41 PM
It's an 8' by 12' shed my father and I built, we are almost finished with it. I also intend to use it as a base of operations.
#14
Posted 12 November 2007 - 05:35 PM
Nerf Rocket Air Launcher
#15
Posted 15 November 2007 - 12:01 AM
The bottem white drawer has darts. The seconed drawer has gun parts such as screws and springs. And the top drawer has modding materials such as hot glue and e-tape. I also have two hot glue guns. One for normnal hot glue and the other is for sparkely silver hot glue for my darts. And that blue square with the nerf symbol is my dart holder for when the hot glue dries.
On the right side of the table is a wooden box. In wich I keep me rapid-fire guns.
On the left side is a simmilar box that I keep my foam for darts in and my nerf scorebordes.
Underneath my table is my pistol drawer. Also under that is my hammer and hacksaw. Also ontop of the pistol drawer is my huge pump that one day I want to put on a gun.
And finaly in my closet is were I keep the rest of my guns. And the chair that I sit in when modding. And when I'm done that shower curtain covers all of the closet.
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#16
Posted 19 November 2007 - 09:32 PM
In the drawers of my desk I have
- drawing papers and graph papers for designing
- foam
- a few miter boxes and hacksaws
Next to the desk is tower of drawers with:
- various tools
- unfinished pistols
- internals
Behind the bookshelf is:
- pipe insulation
- 5/8" FBR
- 1/2" PVC
- 3/4" PVC
- 1" PVC
- 1 1/4" PVC
And finally in the closet is:
- lots and lots of nerf guns
- empty tool boxes
- barrels for guns
- darts
- barrels
- a scale
- screwdrivers
- a full tool box
- spare parts
- parts from my current homemades (GNS and homemade airgun)
- adhesives
- behind the adhesives is a box full of airsoft parts and extra plastics
- in the red basket are some bigger guns like the longshot and magstrike and such
- homemade arrow materials
- 3" PVC and 2" PVC
- more darts and arrows
Edited by Foam_Shooter, 19 November 2007 - 09:37 PM.
#17
Posted 23 November 2007 - 12:14 AM
Garage:
8 foot workbench covered in various materials that a garage collects.
Vice grip
Air Compressor
Cabinet with lock. This holds the paint and gas for lawnmower.
Three rolling drawers with various junk and glue.
5 foot tall tool box with screwdrivers, saws, gloves, razors, etc.
Cabinets with food and other junk
Open shelves hold my dremmel which I need more parts for.
I'm pretty sparse on materials since I don't really mod that much, but it gets the job done when I feel like it.
#18
Posted 23 November 2007 - 12:50 PM
-PVC and CPVC
-Random cardboard boxes and pieces
-2 open soakers that were never repaired
-A Mav and RF20 under repair
-Random tools (drill, dremel, PVC cutter, hacksaw, stuff like that)
-A homemade soaker and pneumatic water balloon launcher
-Gorilla glue and epoxy
-Some random other stuff
Later on, I'll have to get some FBR and more CPVC.
Edited by C-A_99, 23 November 2007 - 12:51 PM.
#19
Posted 23 November 2007 - 09:48 PM
P.S. It is NEVER this clean...
I just usually bang mine against some sort of ananimaite object untill it eventually breaks off.
#20
Posted 23 November 2007 - 11:11 PM
The bed in my room
The floor in my room.
And my desk.
And the kitchen table.
All are in a clean state at the moment.
#21 Guest_CornMan_*
Posted 06 December 2007 - 03:54 PM
http://i227.photobuc...Myworkspace.jpg This is just where I hot glue stuff, saw stuff, and do some modding. I also mod on my desk too. I also paint there too. Sorry for bringing this topic back up
Edited by CornMan, 07 December 2007 - 12:11 PM.
#22
Posted 07 December 2007 - 07:24 AM
Some of my guns, that are 100% finished (I know there are not a lot)
Parts and other non-Nerf stuff
Unfinished guns and parts
4 boxes full of mostly unfinished guns and parts
Stefan making and unscrewing area(the only organized area).
Tool and power tools underneath. To the right is a wall of paints(not shown in picture) Would you believe it's 9:30 at night in this picture?
#23
Posted 07 December 2007 - 04:21 PM
Nerf Rocket Air Launcher
#24
Posted 07 December 2007 - 05:55 PM
I just usually bang mine against some sort of ananimaite object untill it eventually breaks off.
#25
Posted 15 December 2007 - 01:24 PM
At the very end of the video is a trippy look at my old workspace before I moved.
I will get some good photos or video soon of my new work space.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users