28 replies to this topic

[rork]

The Buzz Bee Mega Missile (MM hereafter) has a great tank, but that's about it; the handle is less than comfy, and the pump is fucking ridiculous, requiring some 25 pumps to pop the OPV. This mod will show you how to turn it into a fantastic primary.
You will need: a Buzz Bee Mega Missile, a standard $5-6 ball pump, a 3/4x1/2" pvc reducing bushing, epoxy putty, CA glue, and goop.
Internals:

Cut the tank down like so, removing the stock barrel and pump tube.

Fill the stub of the pump tube with epoxy putty, making sure you don't foul the original check valve. Then press the end of the new pump into the soft epoxy putty, making a fairly exact impression.

Coat the end of the pump with CA glue (I prefer Loc-Tite). Then press it into the end of the tank.
When it's dry, go ahead and goop around the joint. (I later added a ring of epoxy putty, just for excessiveness' sake.)

Glue on your bushing. I used a probably lethal combination of goop and CA glue.

You'll need to dremel this out, so that the ball pump fits. It ain't a subtle process; just keep removing plastic until it fits in there tightly. You should be able to keep all 3 screws if you're careful.


Dremel the front out for the bushing.

And you're done. However, I wanted more. Due to the shape of the shell, a pvc turnaround has to fit sideways.

I wanted to take advantage of this. So I made a triple speedloader.

And remember that small grip? I cut a couple of lengths of 3/8" PEX, taped 'em together, then taped it to the handle. Primitive, but highly effective. You could get as sophisticated as you want with this, of course.


Family photo:



Now, you may be thinking: "Rork, isn't replacing the stock pump with a ballpump just like plugging it?" The answer is no. The large face of the ball pump prevents building up too much pressure; you need some muscle to pump this. 1 pump fills it up nicely. And yes, you can do this same mod to a BBBB or LBB, with great results.

[NerfRogue83]

Very nice Rork. I am kinda glad you didnt have this done for SOFA, your BBBB/MM did enough damage. Maybe I missed it, but what barrel length are you using?---Rogue.

[rork]

Hehehe. It's a full foot of petg on there. This thing is sort of like some mutant spawn of a 2k and a BBBB, and I fracking love it.

[orogomi ninja]

Wow nice, I am just curious to what the exact ranges are. ( has to be over 100) yeah that pump is a bitch, looks like the best alternative. I would have just put the tank in another shell.

Magnificent!

[Nerf Bros]

Whats your favorite source for ball pumps? I've been looking for one for my sgsl and this one could be perfect. Nice mod, makes a useless but good blaster war worthy. Ranges? BBBB like?

[DartzDude]

Nice Job, It's cool that the new pump will act like a stock. Is the gun comfortable to hold?Ranges? Once again nice job.

[Jangadance]

I haven't seen this blaster, actually... Why does Buzz Bee make such horrendous shells? I mean seriously. And that pump is heresy. Has anyone posted comparison pics to the Blast Bazooka?

The air tank, or in other words, pull valve, is the only redeeming quality of this blaster... And Lanard seems like they essentially minimized their Blast Bazooka and put it in an tragically ugly casing. As far as the mod, I'd say simply based on the fact that it can achieve higher pressure with a bike pump past the 100 PSI mark, this is an equivalent to plugging a stock pump. But these things can be case by case and "house ruled".

edit: Looks like it could present a cheap, ugly, and decent blaster even with the detractors... thanks for the writeup!

Edited by Jangadance, 19 August 2009 - 10:32 PM.

[Norther of Heaven]

Thats just beautiful. I've always been opposed to getting one because of the pump-length. Nice job, and seconded about the not bringing it to SOFA, even though i did not go.

[bigred1rifleman]

Wow, this is really cool. I've got several questions, though.

1. Where could I purchase one of these "MMs"?
2. What's CA glue? Is it just a kind of super glue?
3. How many pumps of the originial pump would be equal to one of the new ball pump?
4. Where'd you get that ball pump?

Great mod and write-up. If I can get my hands on one of these I'll definitly do this.

Thanks
Finn

[rork]

Wow nice, I am just curious to what the exact ranges are. ( has to be over 100) yeah that pump is a bitch, looks like the best alternative. I would have just put the tank in another shell.

Magnificent!

It's something less than a BBBB, which is to say, PLENTY. I have no intent of measuring.

Whats your favorite source for ball pumps? I've been looking for one for my sgsl and this one could be perfect. Nice mod, makes a useless but good blaster war worthy. Ranges? BBBB like?

I get my ballpumps at either Wal-Mart, which carries better ones, or K-Mart, where I got this one, as well as the MM.

Nice Job, It's cool that the new pump will act like a stock. Is the gun comfortable to hold?Ranges? Once again nice job.

It is comfy, although I just use it as a big pistol.

I haven't seen this blaster, actually... Why does Buzz Bee make such horrendous shells? I mean seriously. And that pump is heresy. Has anyone posted comparison pics to the Blast Bazooka?

The air tank, or in other words, pull valve, is the only redeeming quality of this blaster... And Lanard seems like they essentially minimized their Blast Bazooka and put it in an tragically ugly casing. As far as the mod, I'd say simply based on the fact that it can achieve higher pressure with a bike pump past the 100 PSI mark, this is an equivalent to plugging a stock pump. But these things can be case by case and "house ruled".

edit: Looks like it could present a cheap, ugly, and decent blaster even with the detractors... thanks for the writeup!

Dude, I specifically said Buzz Bee, not Lanard. And the shell works. However, as I said, the ballpump does not in any way create a safety issue. I was using my ball pump modded 4B at SOFA, and no one, including Mag7 ("Omigahd, the mag7 are bannin' mah gunz") member Groove had a problem with it; as I said, the pump is simply too wide to allow high pressures to build.

Thats just beautiful. I've always been opposed to getting one because of the pump-length. Nice job, and seconded about the not bringing it to SOFA, even though i did not go.

It is nice, man. It's a great primary for under $15, which is the kind of thing we need more of.

Wow, this is really cool. I've got several questions, though.

1. Where could I purchase one of these "MMs"?
2. What's CA glue? Is it just a kind of super glue?
3. How many pumps of the originial pump would be equal to one of the new ball pump?
4. Where'd you get that ball pump?

Great mod and write-up. If I can get my hands on one of these I'll definitly do this.

Thanks
Finn

CA=cynoacrylate=super glue. Stock pump requires 25, ball pump needs one.

[cannotaim]

Wow, this is really cool. I've got several questions, though.

1. Where could I purchase one of these "MMs"?
2. What's CA glue? Is it just a kind of super glue?
3. How many pumps of the originial pump would be equal to one of the new ball pump?
4. Where'd you get that ball pump?

Great mod and write-up. If I can get my hands on one of these I'll definitly do this.

Thanks
Finn

1. I've seen them at kmart.
2. Its just super glue.
3. About 20
4. Anywhere were they sell basketballs and footballs and soccerballs

[humfree]

Buzzbee has lots of ups and downs with guns and modability.

[cannotaim]

Disregard

Edited by cannotaim, 19 August 2009 - 11:26 PM.

[Galaxy613]

1. I've seen them at kmart.
4. Anywhere were they sell basketballs and footballs and soccerballs

Yep, I've ONLY seen them at KMarts. I've also seen nice ball pumps at Toy's R Us, even dual action jobbies.

[pongityping]

1. I've seen them at kmart.
4. Anywhere were they sell basketballs and footballs and soccerballs

Yep, I've ONLY seen them at KMarts. I've also seen nice ball pumps at Toy's R Us, even dual action jobbies.

I tried putting a dual action ball pump in a big blast, a cruder way than rork did, but I found that I couldn't seal it completely air-tight because it had holes in the front for the dual action part that would get covered if I gooped over it. So I would go with normal pumps. It doesn't really matter, because 1-2 pumps should fill the tank anyway.

[white moonlight]

Very nice mod and it's very cleanly done.

I did a pump replacement with a 2k pump and at 15 pumps I'm hitting 130.

This absolutely amazing though, and it has to be breaking 100, with 1 pump, it's great.

[jerm78]

Nice mod. I did something similar but with a Titan pump and expanded the air tank. It didn't fit well in stock shell so I put it in a 3k shell.

[Collective]

I've just successfully decrapified my Mega Missile!



Works like a charm. I had to use JB Weld to connect the pump, but otherwise I followed the write up to the letter. Thanks a lot for this mod!

Edited by Collective, 20 August 2009 - 07:57 PM.

[rork]

That looks nice, man. Actually, epoxy of whatever type would be pretty much ideal for this.

[Hi Yah]

Great mod! I've always wanted to get a mm but have been discouraged because of the pump.

[ZACHARIAH]

Amazing mod! I am thinking about doing this to my big blast. How many pumps would you reccomend (SP?) for a big blast because I don't want to destroy it.

[rork]

You can't blow a BBBB with a ballpump. 3 pumps is about the maximum that will fit.

[ace of nerf]

Thanks for this guide rork. Very nice.

Here's my version of it.




1 pump gets 90ft for those of you who want ranges.

[ilzot]

Just saw this exact pump at Modell's yesterday.

Just saw the same gun at 5 Below a week ago.

I gotta coupler sitting around.

Talk about having to do a group buy soon.

I expect to be doing this soon. Very good job, and pretty clean, even though you doubled the size of it.

Suck-cess, man. Stock MM's piss me off.

[Cappy]

That is a truely beautiful gun. What size is your ball pump if i missed that? Also is it comfy as a stock? Thanks