12 replies to this topic

[oodalumps]

I made my clip for my Magstrike have 11 shots. It will be harder to do if you have a regular magstrike clip (with the guts still in it), but it could still be done if you have a large enough drill bit to make room for the barrel.

(This clip is so disgusting looking)


I took a plastic stick that I used for my Longshot magazines and cut it to 3/4". I lost the little bag they came in so I don't know the exact size, but it's the exact same size as the ridges on the Magstrike. Then I Used a metal file to give it a wedge.



I super glued it onto the clip.



Then I drilled the back plate of the clip. The hole could be bigger, but the next drill size I had was too big. I hot glued petg onto the hole and used super glue to make it air tight.

[Bomberman]

That is awesome! 11 shots that go like, 100 feet flat? Now THAT's a primary! But seriously, there is this thing called expanding foam. Put it in between the barrels. It looks like a baby spit up in your clip.

[Poseidon]

It seems like a lot of trouble for one shot, but I guess every shot counts! Nice one.

[NerfCrazy]

Very nice, I want to do that but have no need since my magstrike shoots maybe 30'.

[bpso86]

Bomberman, on Jul 29 2008, 02:55 PM, said:

That is awesome! 11 shots that go like, 100 feet flat? Now THAT's a primary! But seriously, there is this thing called expanding foam. Put it in between the barrels. It looks like a baby spit up in your clip.

How on God's green earth are you getting a Magstrike to shoot 100' flat?

[123caviler]

Oodalumps never said anything about being 100' flat, Bomberman did. But, that would be impressive.

[Banshee]

So has anyone dared to completely fabricate a MS clip yet? I'd assume it'd be too much work to be worth it, but I'd like to see it be done just to float my boat...

[CaptainSlug]

Banshee, on Jul 29 2008, 04:43 PM, said:

So has anyone dared to completely fabricate a MS clip yet? I'd assume it'd be too much work to be worth it, but I'd like to see it be done just to float my boat...

I designed one in CAD, but haven't bothered to try.

Edited by CaptainSlug, 29 July 2008 - 05:07 PM.

[Banshee]

CaptainSlug, on Jul 29 2008, 03:07 PM, said:

Banshee, on Jul 29 2008, 04:43 PM, said:

So has anyone dared to completely fabricate a MS clip yet? I'd assume it'd be too much work to be worth it, but I'd like to see it be done just to float my boat...

I designed one in CAD, but haven't bothered to try.

I figured you might have. It sounds like a lot of fabrication and plastic and in the end, you might as well just buy some extra clips off someone.

[oodalumps]

bpso86, on Jul 29 2008, 05:11 PM, said:

Bomberman, on Jul 29 2008, 02:55 PM, said:

That is awesome! 11 shots that go like, 100 feet flat? Now THAT's a primary! But seriously, there is this thing called expanding foam. Put it in between the barrels. It looks like a baby spit up in your clip.

How on God's green earth are you getting a Magstrike to shoot 100' flat?

I'm waiting for the video to be processed on Youtube. I'll post the link in my assault Magstrike thread when it's done.

[imaseoulman]

bpso86, on Jul 29 2008, 05:11 PM, said:

How on God's green earth are you getting a Magstrike to shoot 100' flat?

Some day I'll post my write-up. I was pretty stoked when my PC hit 100' flat (but good luck hitting anybody beyond 80').

Edited by imaseoulman, 29 July 2008 - 07:14 PM.

[Shrub]

Well my stock MS can shoot stock darts 60 at a 45* angle so with tons of mods (band, pump plugged, maybe an o-ring for a seal etc .)

[Brunta]

This makes me wish I hadn't totally destroyed my magstrike to turn it into my integration gun. But still, awesome mod.