- NerfHaven
- → atomatron's Content
atomatron's Content
There have been 437 items by atomatron (Search limited from 02-January 97)
#260101 Modification and Paintjob Pictures
Posted by atomatron on 29 December 2009 - 04:19 PM in Modifications
I basically gutted everything except the turret mechanismand trigger, stuck a BS tank in there, hooked it up to a valve, pump and a CPS super soaker tank.
I made this to be an indoor monster, it gets upwards of 50' with stock darts, which is pretty good considering that after 25 pumps I can get 5 shots off.
#261279 Modification and Paintjob Pictures
Posted by atomatron on 09 January 2010 - 04:12 PM in Modifications
The final touch:
#257619 Modification and Paintjob Pictures
Posted by atomatron on 30 November 2009 - 06:16 AM in Modifications
Larami SuperMAXX 1000:
Whipshot, CPVC coupler gets ~80':
Spiderman thingy:
SuperMAXX 1500 ala CaptainSlug
#256874 Modification and Paintjob Pictures
Posted by atomatron on 20 November 2009 - 07:32 PM in Modifications
My largest secondary:
#254004 Modification and Paintjob Pictures
Posted by atomatron on 19 October 2009 - 08:52 PM in Modifications
In other news, I manta'd my NFat the mod party before chano3..
#255167 Modification and Paintjob Pictures
Posted by atomatron on 02 November 2009 - 06:05 AM in Modifications
I basically cut the barrel, took out the AR, super glued the barrel back on, hollowed out the back of the secret barrel so that a dart can fit through and I superglued the yellow rubber part back on. The stock barrel acts as a coupler for the medium wall PETG with a 17/32 brass stub in it, but I have found it fun to use the secret barrel as a breech of sorts; with a flick of the wrist it goes up, I load it, pump 10 times, press the upper trigger and fire. I don't have ranges yet but with the 6" speed loader it can punch holes in a box so probably 90+.
#264101 Modification and Paintjob Pictures
Posted by atomatron on 01 February 2010 - 11:05 PM in Modifications
The end result:Clear longshot breech.
It shoots just as far as my old one, the only changes:
-Stock spring with [k25] spring instead of a BBB and NF combo
-Better plunger head cushioning
-Completely solvent welded together
-Due to the use of polyester; the seal is not as good
-Less epoxy putty
Link to the original topic
#271190 Modification and Paintjob Pictures
Posted by atomatron on 03 April 2010 - 09:58 AM in Modifications
I put it back together only to find that I really don't have a use for it, so I'm selling it.
It has a [k25] spring,a 1' 17/32" brass insert and that is a different turret, the Etape is mostly for show, though it does add to the purpleness.
EDIT: MORE STUFF WITH NEW CAMERA
Tetrastrike with pex barrels:
Awesome tiny big lots blaster:
#303192 Modification and Paintjob Pictures
Posted by atomatron on 11 August 2011 - 02:29 AM in Modifications
I might do a tutorial for this technique.
#325241 Modification and Paintjob Pictures
Posted by atomatron on 12 January 2013 - 02:47 AM in Modifications
Tediously removed the pegs but maintained these nubs so the mechanism would still work
Decent blaster IMO, those Elite darts are just as inaccurate as steamlines judging from the 8 that it came with.
#294060 Modification and Paintjob Pictures
Posted by atomatron on 07 February 2011 - 11:56 AM in Modifications
#286042 Modification and Paintjob Pictures
Posted by atomatron on 25 September 2010 - 05:54 PM in Modifications
And put some super rainbow shiny sticker sheet on my LS:
#279555 Modification and Paintjob Pictures
Posted by atomatron on 05 July 2010 - 04:10 PM in Modifications
It prevents darts from falling out the bottom of the clip slot if you fumble a dart while loading.
Very helpful while running and reloading. These 4" pieces of CPVC saved me a few times at SPANO (on my other LS).
My singled RFSG
I tried to make it as ugly as possible (without leaving it black) to match my nerfing suit jacket.
#280128 Modification and Paintjob Pictures
Posted by atomatron on 13 July 2010 - 12:40 AM in Modifications
Interchangeable stock for my RFDG:
A section of 1/2" PVC is hot glued into the stock attachment thing and then I bolted the PVC bit to the shell on both sides, (I intend to use the folding stock thing with this) also the raider stock is bolted all the way out.
Xbow fix:
I tapped the stock/worn out screw ports for 6-32 and cut bolts down to fit, works well so far.
#252768 Modification and Paintjob Pictures
Posted by atomatron on 06 October 2009 - 05:02 PM in Modifications
After:
...no, it is NOT Michael Jordan themed...I just had that #23 decal lying around and it happened to be red.
#247231 Modification and Paintjob Pictures
Posted by atomatron on 16 August 2009 - 02:09 PM in Modifications
^The breech cover is the thing with grey epoxy putty on it, it is closed in this picture.
The gap for the darts to go in is 1+1/2" long and the pump tube piece is 2" long, it is situated farther back than any other LS breech that I have seen and has only about 2" of deadspace.
It's pretty cool because when it is cocked the pump tube/breech cover slides over the CPVC and when it is moved forwards the cover stays in the same spot, so I only have to put a dart in and pull the cover back. Another upside is that I never have to worry about losing my fingers to this LS.
I left the bipod on because I don't have what I need to finish it and its comfy. Also with a NF spring, silver BBB and LS springs it is getting 90'+ (it's hitting the fence at the other end of my yard). Other info; it has a static stock and the barrel goes all the way to the end of the orange thing at the front.
#233465 Modification and Paintjob Pictures
Posted by atomatron on 30 May 2009 - 05:56 PM in Modifications
This is possible because the draw of the BBB is 3+1/2" and the pump for the SM750 is about 4".
#228328 Modification and Paintjob Pictures
Posted by atomatron on 05 May 2009 - 04:41 PM in Modifications
#225941 Modification and Paintjob Pictures
Posted by atomatron on 25 April 2009 - 09:00 PM in Modifications
#237211 Modification and Paintjob Pictures
Posted by atomatron on 18 June 2009 - 05:42 PM in Modifications
It could probably have used more neon/florescent pink, oh well.
#212531 Modification and Paintjob Pictures
Posted by atomatron on 15 February 2009 - 06:13 PM in Modifications
Trishot attachment made from 1/2'' to 3/4''coupler and four 2'' CPVC sections. [gets about 32' average]
Rear view of my brassed doubleshot with half shell ejection. Gets about 25' to 35'.
My old Mav... it doesn't work too well, the seal has degraded or something and the paint is a little worn. It gets about 20' to 25'.
The cocking bar retainers broke, so I replaced the bar with one from a LS front gun. the orange nubs are AR things.
Crap, some of them are out of focus...
#208687 Modification and Paintjob Pictures
Posted by atomatron on 01 February 2009 - 04:56 PM in Modifications
My current primary; a BBB (old purple version). It took about 4 hours to do (with drying time). I plugged the arrow holder holes with epoxy putty as opposed to cutting them off.
I personally think it could use some more red on the front handle.
My NF, there's a little wear on the handle from my decision to wear rings while nerfing.
and an Effeminate shot (with bands).
Just to note; this one HAD a blue LED in it, then became finicky and stopped working...
My second favorite MAV (that works).
The sticker says: "CAUTION do not stick finger into the center of this device"
it looks a little worse-for-wear because I painted it during the summer and it has been used since then.
#321682 Homemades Picture Thread
Posted by atomatron on 16 September 2012 - 12:39 AM in Homemades
The original HEC 2(a) is in the middle, I initially wanted a standard handle positioning.
#286791 Homemades Picture Thread
Posted by atomatron on 11 October 2010 - 11:24 AM in Homemades
I used 1/2" ID polycarbonate for the plungertube (not advised as it costs 8 times more than PVC and there aren't any PVC fittings that really fit). I used a [k25], a magical 3/4" to 1/2" reducing coupler thing for the front and a 1/2" OD washer sandwich.
The handle is similar to PACs
Closeup of the trigger setup
SUPA DRAW
It's output is 13.2 ^3 in
Stock
Speed holes
#286943 Homemades Picture Thread
Posted by atomatron on 14 October 2010 - 12:07 PM in Homemades
it's about 4.5" tall, the barrel on it is 20". The cross section is identical to those on PACs and it can be taken apart down to the cross assembly.
Cutting this slot was a real pain, at the back there is a catch which can work but I found it sort of a pain and I have since made it so that it doesn't work.
It has an 11" draw and puts out 16 in^3.
I reamed out a 1/2"PVC coupler and attached it to the string for easier pulling, then there's a 1/2" to 1 1/4" bushing, a 1 1/4" coupler and the plunger tube of 1 1/4" PVC.
SNAP style seal on the nylon rod that is the plunger rod
#241882 Dartsmithing Tips Archive
Posted by atomatron on 14 July 2009 - 10:27 AM in Darts and Barrels
#198176 How Many Guns Do You Have In Your Arsenal?
Posted by atomatron on 22 December 2008 - 09:38 PM in General Nerf
---Working---
1x BBB (Painted, spring addition and CPVC coupler)
1x Crossfire (AR removal)
1x longshot (AR and 2 Mav springs)
4x Maverick -(Painted with ARs and pegs removal)
-(clipped, ARs and craft foam'd turret seal)
-(ARs)
-(Painted, ARs and cocking bar replacement)
1x Mech T20 (Painted)
2x Nite Finder [both] (total ARs, e-taped+foamed plunger head, o-ring addition, spring addition)
-(one minimized with front and handle ammo holds)
-(other Painted with LED replacement)
1x Recon (AR removal)
---Dead or Disassembled---
1x AT3K (to be brassed)
1x LSFG (integration to be)
2x Mav -(spring in LS)
-(failed Nitemav)
---Gone Forever---
1x BBB (only had one deformed arrow, shot only five feet)
2x Maverick (both had the nub on the plunger /tube snap off)
#224780 Foamtalk: A Nerf Podcast
Posted by atomatron on 21 April 2009 - 04:36 PM in General Nerf
Ok, but the third coast rules.And for the record, West Coast Nerf owns.
It took 40 min to load but was worth it, good job guys.
#223641 Foamtalk: A Nerf Podcast
Posted by atomatron on 14 April 2009 - 05:59 PM in General Nerf
#228187 Foamtalk: A Nerf Podcast
Posted by atomatron on 04 May 2009 - 08:55 PM in General Nerf
The next one requires more Nerf!!
#229760 Foamtalk: A Nerf Podcast
Posted by atomatron on 12 May 2009 - 06:38 AM in General Nerf
I'll edit this post after I've listened to the podcast...
#236752 Foamtalk: A Nerf Podcast
Posted by atomatron on 16 June 2009 - 12:59 PM in General Nerf
Looking forwards to the next one, please update the subtitle when you add it.
#236744 Raider Preview
Posted by atomatron on 16 June 2009 - 12:13 PM in General Nerf
#236483 Raider Preview
Posted by atomatron on 15 June 2009 - 04:47 PM in General Nerf
...but it's stock, the air restrictor is still in place.I feel kind of sorry for that gun. It's been dry fired excessively.
It's like a Nerfy STEN.
#218791 3rd Annual Mnsbw
Posted by atomatron on 19 March 2009 - 03:36 PM in Nerf Wars
High of 44* and Low of 26* mostly cloudly.
A friend of mine says he will go.
He is somewhat noobish (he's only ever used my BBB and a mav) I'll have him informed by the 28th as to what the expectations are (calling hits, 3/15 and all that jazz).
- NerfHaven
- → atomatron's Content
- Terms of Service and Privacy Policy
- Code of Conduct ·