PointBlank's Content

Ok. First off I know that this has been posted about but it was a long time ago and it wasnt good help for me.

Everything was fine with my titan until one day when I attempted to take the orange part of the barral off to put the dart in and it wouldnt come off. I know that the cause of this is the child safty lock but I cant figure out how exactly to unlock it. I know that it has something to do with pulling while I twist but i need something more specific.

Any help would be apreciated, thank you!

#104211 Titan Help

Posted by PointBlank on 06 May 2007 - 02:12 PM in Modifications

Thanks for the help!

#105304 Bbb Problem

Posted by PointBlank on 13 May 2007 - 07:48 PM in Modifications

There is a white air restrictor, it isn't vital, but itshould still be in there, also make sure that your plunger isn't upside down (as in not being able to catch, or catching very slightly). I doubt that is your problem, but just check. also, be SURE that the plunger head (not the plunger itself) isn't upside down. It should be sort of cupping the sides of the wall.
If this side of my post is the front of the gun, it should be like this >----
not like this <-----
Edit: Ok, nevermind you fixed it.

Do you realy need the air restrictor? I took mine out and it works just fine.

#139232 Very Simple Maxshot Mod

Posted by PointBlank on 07 February 2008 - 09:48 PM in Modifications

This is a very well thought out write up and even though there are no pictures, I can easily picture what is going on in my mind. Props.

#226755 Cross 'n Load

Posted by PointBlank on 27 April 2009 - 10:36 PM in Modifications

Props man, I love the look.

#106345 The New Nerfer's Guide

Posted by PointBlank on 18 May 2007 - 06:47 PM in General Nerf

Wow. I was un shure about what some of theose ment. Thanks for the post, it realy helped me alot.

#104124 Illinois Nerfers

Posted by PointBlank on 05 May 2007 - 09:18 PM in General Nerf

Thats interesting I live in Elgin too.

#225323 Question?

Posted by PointBlank on 23 April 2009 - 05:39 PM in Off Topic

First, you are going to need an image storing website. Like this. Upload your images there. Then, when you are posting something, you will see a little icon that looks like a globe on top of a chain located right above where you are typing your message. I hope this helped, if it didn't, I will re-explain in greater detail.

I know exactly how you feel. The first few months on this website I had no idea either.

#228953 Universeofhaven Or Something,

Posted by PointBlank on 08 May 2009 - 05:40 AM in Off Topic

He actually said April fools at the bottom of his post, so no, it is not true.

#107422 Nite Finder Mod Messed Up

Posted by PointBlank on 24 May 2007 - 05:26 PM in Modifications

Well, in my experience, brass works a heck of a lot better than coper. I use a 9/16" 4" barrel and it works marvelously.

#227365 All City Moshpit Tourniment In Naperville

Posted by PointBlank on 30 April 2009 - 09:09 PM in Nerf Wars

Which Naperville?

#227378 All City Moshpit Tourniment In Naperville

Posted by PointBlank on 30 April 2009 - 09:24 PM in Nerf Wars

Oh yeah, right on the other side of Wheaton. I am really close, hopefully I can be there. Finally a local war!

#139170 Nested Brass Discovery.

Posted by PointBlank on 07 February 2008 - 05:13 PM in Modifications

Thats prety cool.

#227514 Plug Help

Posted by PointBlank on 01 May 2009 - 06:02 PM in Modifications

Epoxy is good because it is very permanent and you never have to worry about it again. I also like tape for some guns because it is reversible. If it is working for you, then you really don't need to change anything. They both function at equal levels.

#108999 Weights For Darts

Posted by PointBlank on 02 June 2007 - 08:48 PM in General Nerf

I use tacks at the end of mine. (pointing in of course with hot glue covering it) Is this wrong?

#226313 Nerf Longshot

Posted by PointBlank on 26 April 2009 - 06:51 PM in Site Feedback

Just a tip... people erotically massage posting these kinds of threads. You will find this out soon enough.

#138976 Pvc Trouble

Posted by PointBlank on 06 February 2008 - 05:33 PM in Modifications

Yes, I did go to the store to select which size to buy.

#138965 Pvc Trouble

Posted by PointBlank on 06 February 2008 - 04:24 PM in Modifications

Today I bought a brand new night finder and began thinking of mods to do to it. I decided on building a bigger plunger tube out of PVC. I thought of using 3/4" PVC because it was comparable in size with the stock plunger tube. Because I don't even know were to begin on making my own plunger mechanism I plan on extending the length of the stock one and using the stock plunger head. The only problem is that the plunger head just barely doesn't fit into the PVC. What I need help on is a way to expand the inside diameter of the PVC evenly so that the plunger can move through snuggly.

Any input would be most appreciated.

Thanks,
-PointBlank

#139173 Pvc Trouble

Posted by PointBlank on 07 February 2008 - 05:24 PM in Modifications

Ive tried everything so far and it's not accomplishing anything. I have decided to give up on the matter and try a diferent mod. Oh well.

#138989 Pvc Trouble

Posted by PointBlank on 06 February 2008 - 06:39 PM in Modifications

Since I am not fortunate enough to have a lathe I am making myself a makeshift lathe with a drill a dowel rod and sand paper it actually looks like its going to work. And thanks for all the suggestions thus far especially CaptainSlug.

#141837 New Airtech 3000's. They Don't Work. F. U. C. K.

Posted by PointBlank on 21 February 2008 - 10:31 PM in General Nerf

I sugjest getting into the gun and examining it closely. Some air leaks can be spotted then repaired.

#105648 Bbb Mod Help

Posted by PointBlank on 15 May 2007 - 01:23 PM in Modifications

Before I brassed my bbb I shot stock darts with a 1' 1/2'' pvc barrel.

#105654 Bbb Mod Help

Posted by PointBlank on 15 May 2007 - 01:55 PM in Modifications

To be honest i was too lazy to do ranges. Sorry

#105708 Bbb Mod Help

Posted by PointBlank on 15 May 2007 - 04:56 PM in Modifications

I made it 1 foot, 10" might be better though.

#229293 Disk Shot Mod | Crayola Barrel | Vacuum Loads

Posted by PointBlank on 09 May 2009 - 11:33 PM in Modifications

The video isn't working for me, could you check and make sure that it is working?

#225820 Nerf Site

Posted by PointBlank on 25 April 2009 - 05:04 PM in Off Topic

No.

#140727 Embedding Videos

Posted by PointBlank on 17 February 2008 - 01:13 AM in Off Topic

Embedding videos? Is that when the video appears as a pic? and is it is how can I transfer my videos from PhotoBucket to YouTube?

I think he means so that you can watch the video right there on the post. People do it in blogs all the time.

Again, it'll be hard to fashion one for yourself, unless you know what you're doing. I'd say, try sheet metal if you want to make your own, that's the only thing I can think of. Also, if you really need some pics of a non-broken one, I'll take pics of my extra one for you.

Thanks. By the way, do you think that a nf catch would work?

#105912 I Need Help!

Posted by PointBlank on 16 May 2007 - 04:40 PM in Modifications

Yah I guess I should just buy another one.

You're not making sense here, if you're talking about buying another TTG.

You come to the Haven, seeking help for your broken TTG.

You clearly state the problem.

Another member of the community offers a part to replace and repair your blaster, for (obviously) less money than a TTG.

You refuse and choose instead to spend more money looking for another TTG.

That's what this community exists for, when it comes to getting blasters back up and running. Were you expecting a freebie or something? People gotta recoup some dough for their broken guns.

If you decide to just get another TTG, don't forget to keep your parts around. You never know who may need something.

-Piney-

I am sorry for being un clear. In my post i was looking for a way to fix my gun, I am just not interested in buying off the internet. I was just wondering if any one had any ideas.

#105843 I Need Help!

Posted by PointBlank on 16 May 2007 - 11:59 AM in Modifications

Yah I guess I should just buy another one.

PointBlank's Content

By content type

See this member's

Sign In