six-five-two's Content

#96775 Modification and Paintjob Pictures

Posted by six-five-two on 18 December 2006 - 11:08 PM in Modifications

Direct Threat, those are some awesome paintjobs. But why don't you try not weathering it (sanding it down and stuff) for once..?

#129460 Modification and Paintjob Pictures

Posted by six-five-two on 11 November 2007 - 07:31 PM in Modifications

Enigma is a armor from Diablo 2 also.

Jah + Ith + Ber = Enigma
+1 Skill Armor

Right?

#96067 Modification and Paintjob Pictures

Posted by six-five-two on 06 December 2006 - 11:25 PM in Modifications

At first I just cut off the foregrip and the front scope with a knife. When I went to cock it I realized it was extemely hard to because my hand would constantly slip. I then cut the front and bottom piece off of the fore grip and glued the remaining piece on to the old spodt but backward so it gave the side of my hand something to grip onto. Here is a close up of the new foregrip type of thing.

I was going to do that but I stopped because my damn BBB is messing up... Read my thread for more info. I think I may buy another one and just remove the air restrictors by cutting off the orange thing and couplering it... unfortuneatly the $15 CANADIAN BBB sale at TRU ended a few weeks ago. Damn.

EDIT: Sorry it was regular price $20 and on sale $15.

#124244 Modification and Paintjob Pictures

Posted by six-five-two on 27 September 2007 - 12:04 AM in Modifications

Zaxby's, what's the range on that thing?!

#96803 Modification and Paintjob Pictures

Posted by six-five-two on 19 December 2006 - 03:17 PM in Modifications

No I mean most of your paintjobs look the same...

#96812 Modification and Paintjob Pictures

Posted by six-five-two on 19 December 2006 - 06:36 PM in Modifications

Ahh nevermind. Your paintjobs kick ass period.

#123429 Modification and Paintjob Pictures

Posted by six-five-two on 18 September 2007 - 06:40 PM in Modifications

This was my 1st and only NF. The fact that's it's still in mostly one piece is nothing short of a miracle since I've taken it apart and re-assembled it ... over 10 times.
I've breeched it only for the looks because my friend requested it. It does not have a good seal because I don't have the proper tubes so it doesn't really work.... but luckily for me, my friend didn't ask for a "working" clipped NF.

Please b00m13! Make a write-up. I really want to know how to make a clippable nitefinder.

#130205 Homemades Picture Thread

Posted by six-five-two on 19 November 2007 - 08:29 PM in Homemades

After reading the FAR homemade writeup and seeing the trobles with the bolts getting pushed up into the gun
I was wondering if you had a "upside down gun" as in the magazine would be going down into the gun would that solve any poblems? make new ones? plz answer
- N=MC2

Again, sorry to backseat mod a bit, but please fix your spelling and grammar.

The concept you are describing is a gravity clip. It works fine as long as you have a weight at the top to prevent the darts from moving around and to push it into the chamber. It may flip around if you turn the gravity clip upside-down.
Boltsniper made this for one of his guns aswell:
http://boltsniper.com/BS-1/BS1.htm

#129863 Homemades Picture Thread

Posted by six-five-two on 16 November 2007 - 01:53 AM in Homemades

Hi im a noob. Im trying to make a homemade to get a better understanging of NERF. Tell me, has anyone ever used a bike pump to make a gun? plz tell me the problems i might of missed. Any advice/criticism is welcome.
thnx,
n=mc2

I don't know if this is backseat moderating or anything, but read the post above you... or get the fuck out.

NerfRifleman, that thing looks awesome! I think it deserves it's own thread.

#127486 Dartsmithing Tips Archive

Posted by six-five-two on 26 October 2007 - 12:17 AM in Darts and Barrels

Video of my dartsmithing method:
Took me long enough to get around to making one.

Nice video! Except the music sounds like the stuff you hear in elevators.

#126206 Dartsmithing Tips Archive

Posted by six-five-two on 14 October 2007 - 06:46 PM in Darts and Barrels

If I'm playing anywhere, I use red foam.

And do you just paint the back ends of your darts, or the whole body?

The whole body because if the part that you painted is faceing the floor then ya wont see it.

Then wouldn't it turn hard as a fucking rock? Post some pictures of them.

#124210 Dartsmithing Tips Archive

Posted by six-five-two on 26 September 2007 - 06:08 PM in Darts and Barrels

If your playing in the sand paint youre darts black
If your playing in the woods paint your darts a bright hunter orange.
If your playing in a house then i recommend glow in the dark paint so that you just turn the lights off and see
em.
If your playing on grass paint them white.

It's all i have to say.

And how exactly do you paint them?

#93336 Dartsmithing Tips Archive

Posted by six-five-two on 30 October 2006 - 12:26 AM in Darts and Barrels

My darts are 1 1/2" long. I shot it out of my BBB that was couplered. 5 feet away. My house is 9 years old though.

#91895 Dartsmithing Tips Archive

Posted by six-five-two on 14 October 2006 - 11:33 AM in Darts and Barrels

If your foam is to big for CPVC try 1/2 in. PEX that stuff fits my larger foam great.

I think I already tried and it didnt fit. I haven't made much stefans lately because I really suck ass at it. I bought some el cheapo hot glue gun at a dollar store... low temp like what you guys said. But it really sucks...

The el cheapo dollar store one is "10 W/120 V"
The old one I have that is broken is "AC100 V"

Which one is a low temp one?

#89849 Dartsmithing Tips Archive

Posted by six-five-two on 16 September 2006 - 10:05 PM in Darts and Barrels

Alot of people here seeem to get their FBR in packages... at my local Rona in Canada, they sell it by the foot. It is like 6-8 cents (CAD) for 1/2" FBR. It is pretty good but it is too fat for CPVC.

#93229 Dartsmithing Tips Archive

Posted by six-five-two on 29 October 2006 - 01:48 AM in Darts and Barrels

I need help with my darts. I am using #8x5/8 screws into my foam. I used a sharpie to dot the middle then hand screwed it in and made it tighter with a screwdriver, then finally added a felt tip. The problem is, I can't get it to be centered so now the darts fly weird... and they are 5-10feet less distance than a dart tag dart.

#93291 Dartsmithing Tips Archive

Posted by six-five-two on 29 October 2006 - 07:43 PM in Darts and Barrels

I am not going to shoot these darts out of high velocity guns like Titans, etc... I dont think it would be a problem. The felt tip is holding it in place.

#93319 Dartsmithing Tips Archive

Posted by six-five-two on 29 October 2006 - 10:41 PM in Darts and Barrels

The screws are 5/8's long. I screw them in with my hand then use a screwdriver to make it as tight as it can be. Then I add a felt tip for safety. I found out today that if I shoot them close range out of a BBB, it will make a slight dent in the wall... So I am still searching for a safe,fast,cheap,good safedart. I have tried Ruffstuff Safe Darts, Foam tipped darts, Stefans with felt tip and a few others... it seems that I will never find a good safe dart...

#93297 Dartsmithing Tips Archive

Posted by six-five-two on 29 October 2006 - 09:07 PM in Darts and Barrels

After how long?

#121035 Nerf Shotgun

Posted by six-five-two on 24 August 2007 - 08:22 PM in Homemades

Holy shit. That looks amazing.

#96534 Nerf Shotgun

Posted by six-five-two on 14 December 2006 - 06:22 PM in Homemades

I am thinking of making my own shotty, but I don't know. All my homemades so far have failed. And I have still in the design phase of the ejector problem.. I also would make my shotty use a 1 1/4" rubber washer plunger instead of a o-ring. And I know it won't make the gun as awesome, but has anyone considered not having shells? It would be hella easier except it won't look all that realistic. But think about it:

With shells:
Pros
-Awesome
-More realistic

Cons
-Hard to make ejector system

Without shells:
Pros:
-Way easier to make

Cons
-Not as cool
-Bullets in tube clip may mess up somehow.

#96640 Nerf Shotgun

Posted by six-five-two on 15 December 2006 - 09:34 PM in Homemades

Ronster that lego gear thing looks cool... And Pineapple, I havent set out a timetable yet because I am still in design phase... Some nerf guns I designed but never got to making it.. I am still having trouble with my design though. The problem is that the tube mag on the top going to the breech is going to be hard. I am going for a no shell design because shells and ejectors and picking them up, etc. are a pain in the ass. So now I am going to use regular 1/2 stefan darts. I want to make the plunger 1 1/4" wide. So the whole pipe will be 1 1/4" diameter, except there is a giant gap between the brass and the 1 1/4" PVC. So if a dart drops into the brass, another dart will go ontop of the breech. The problem is that I have a breech of 1" to 1/2" Coupler to 1/2" PVC, so if I load a dart in, and close the big breech, the dart in the middle (between the tube and the breech) will be smushed by the breech closing. So that's the problem with my shotgun design so far... Other than that I think I can start building it sometime soon.

#107232 Nerf Shotgun

Posted by six-five-two on 23 May 2007 - 01:29 AM in Homemades

...Don't expect Commonly Hunted updating his progress, he was banned in an Off Topic thread.

#96470 Nerf Shotgun

Posted by six-five-two on 13 December 2006 - 10:17 PM in Homemades

Oh, I don't know if anyone has shown you the link in the last 8 pages but you should check out Torque's Boomstick.

http://nerfhaven.com...?showtopic=6867

Scroll down for pics of the complete gun.

This is one of my favourite homemade nerf guns on this forum... except there isnt that much details on the gun or schematics for it.

#127238 New Nerf Blaster From Hasbro

Posted by six-five-two on 24 October 2007 - 09:14 PM in News

Holy fuck. That is crazy! So much accessories though.

#109662 How Many Guns Do You Have In Your Arsenal?

Posted by six-five-two on 05 June 2007 - 10:12 PM in General Nerf

BBB, Longshot, Rapidfire 20, 3x Nitefinders, Atom Blaster, Electric Eel, Secret Shot I... trying to keep it simple like Richomundo. I have been trying to sell some things.

#90879 Where To Buy Modding Materials

Posted by six-five-two on 30 September 2006 - 11:37 AM in Modifications

Yeah you can find slingshot weights at any sports/fishing/walmart store

So you prefer PETG over brass right? And I should not buy 1/2" PETG but buy 9/16"?

How much is PETG?

#90829 Where To Buy Modding Materials

Posted by six-five-two on 29 September 2006 - 06:41 PM in Modifications

I think I should make up a separate thread with my list... It is this list but shows where to buy stuff and what section it is in at the store...

Epoxy – Hardware store – Epoxy/Hardware
PETG – Pet store – Aquariums (Aeration systems) OR Plastics shop – copolyester tubing)
PVC Piping – Hardware store – Plumbing Pipes
PVC Fittings – Hardware store – Plumbing Fittings
Brass – Hobby store – Model trains OR Ace Hardware – Metal Sheeting
Foam Backing Rod – Most hardware stores (Rona in Canada has it for 6-10 cents a foot) – Weather stripping
Hot glue gun – Hardware store, Hobby store or Arts and Crafts store – Hot glue gun
PVC Cement – Hardware store – Plumbing supplies
PVC Primer – Hardware store – Plumbing supplies
Screwdrivers – Hardware store – Hardware
Ruler – School Supplies store – Ruler
Hacksaws – Hardware store – Hardware
Dremel – Hardware store – Hardware
Plumbers Goop – Hardware store – Plumbing supplies
Paint – Hardware store – Paint OR Paint Store
Electrical Tape – Hardware store – Hardware
Duct tape – Hardware store – Hardware
Vinyl tubing – Hardware store – Plumbing section
Sandpaper – Hardware store – Hardware
Files – Hardware store – Hardware
PVC Cutting Shears – Hardware store – Plumbing supplies
Craft Foam Sheet – Arts and Crafts store – Craft Foam
Tape Measure – Hardware store – Hardware
Slingshot Ammo – Wal-Mart – Hunting or OR Sports Store – Slingshot Ammo
Steel BBs – Wal-Mart – Hunting OR Sports Store – BB Gun Ammo
Fishing Weights – Wal-Mart – Fishing OR Sports Store – Fishing
Springs – ACE Hardware – Springs

Online Stores:
http://www.mcmaster.com/

ENJOY

#81253 C.s.h.g.

Posted by six-five-two on 05 May 2006 - 12:08 AM in Homemades

Holy shit!!

Nice. Keep up the good work!

#96718 C.s.h.g.

Posted by six-five-two on 17 December 2006 - 06:49 PM in Homemades

I just said previously that Captain Slug needs to start finishing his projects, if not why bother posting, all of his ideas, has he ever actually finished something? Oh, besides the Longshot cocking arm I think not.

Good point. I hope he finishes his C.S.H.G soon... And his longshot shotgun kits were a success. So he did finish atleast 1 homemade. Oh, and he made those washer darts.

#133494 +bow

Posted by six-five-two on 23 December 2007 - 04:15 AM in Homemades

Wow... amazing. I would pay for one if you start selling them.

#135223 +bow

Posted by six-five-two on 07 January 2008 - 12:48 AM in Homemades

That tutorial is... amazing. Good work!

Can't you find an already used laser cutter?

#135018 +bow

Posted by six-five-two on 05 January 2008 - 02:13 AM in Homemades

1/2" I suppose...
Kindly shut it. I don't need anyone to answer questions for me. Let alone in a flippant and unhelpful manner.

Sorry for the minor de-railing, but I couldn't help it...

SHUTTTT DOWNNNNNNNNNNNN

Back on topic, CS I bet you can make quite a bit of those if you sell it auction style on eBay, didn't someone's modded Longshot (was it FA_24?) that sold for $200 or so? I bet you can sell your +bows for atleast $200.

#123739 Abp5k

Posted by six-five-two on 21 September 2007 - 01:37 AM in Homemades

1. It fits into a camelback bag.

So you could drink out of it and hold your tank at the same time?!

#126582 Abp5k

Posted by six-five-two on 18 October 2007 - 08:26 PM in Homemades

If I didn't know any better, I'd say you were asian.

I don't think he is.

#124932 Abp5k

Posted by six-five-two on 03 October 2007 - 07:32 PM in Homemades

All of the parts will be painted once the gun is complete.
I think the clear pieces look cool, so people can kinda see how it goes together.
I dunno, just my opinion.

I agree with you aswell.

#126607 Abp5k

Posted by six-five-two on 18 October 2007 - 11:43 PM in Homemades

I doubt he will be selling these. Unless for an astronomical price.

#126610 Abp5k

Posted by six-five-two on 19 October 2007 - 12:23 AM in Homemades

Do you think in the future it would be possible to create kits with all the parts in it?
They would be crazy expensive. It's $65 in supplies and thye take a good deal of time to make.

$65! I thought it would be a bit more...

#126747 Abp5k

Posted by six-five-two on 20 October 2007 - 02:39 PM in Homemades

Why are you going to paint it? It looks really awesome without being painted (all clear parts).

#125898 Abp5k

Posted by six-five-two on 11 October 2007 - 10:59 PM in Homemades

Well now I have to go to hell.

I couldn't help but laugh there.

six-five-two's Content

By content type

See this member's

Sign In