Crankymonky's Content

#61028 Nerfers Nerfing Disease

Posted by Crankymonky on 03 August 2005 - 09:07 AM in Off Topic

To restart it, either Reboot your computer or go to start -administrative tools- services-F@H and click start. Assuming it's a service. Try one or both of those ways.

#60997 Nerfers Nerfing Disease

Posted by Crankymonky on 02 August 2005 - 10:17 PM in Off Topic

Not sure, but, is it using your CPU? That would be the first thing to check, other than that, or running both as service and from console (I did this once), not sure. Cx, Spoon? Someone else?

Crank'

#60912 Nerfers Nerfing Disease

Posted by Crankymonky on 02 August 2005 - 11:58 AM in Off Topic

You have to let it finish the current workunit before uninstalling and reinstalling. Also, after uninstalling, make sure to go to control panel-administrative tools-services, and disable FAH if it isn't automatically done.

I've never used any other client but the console. If they use the same files (likely) it may be possible by overwriting client.cfg and the work folder. But, I haven't tried it. It probably won't let you, I've had it restart a work unit after changing client.cfg because it was Anonymous. Then, I did the same thing again and kept the work unit on another machine.

Crank'

Oh, I recommend just finishing your work unit.

#60848 Nerfers Nerfing Disease

Posted by Crankymonky on 01 August 2005 - 08:25 PM in Off Topic

One of those machines I fixed the config is rockin'. Too bad I didn't do that 3 days ago!

Crank'

#62505 Nerfers Nerfing Disease

Posted by Crankymonky on 24 August 2005 - 01:24 PM in Off Topic

My PC's are back on, I went on vacation and turned them off. So I'll be helping out again.

10 second Edit: After this Work Unit, I'll leave the Sempron 3100+ on with nothing else running because someone wanted to see how it folded, I think it was Cx.

#68577 Nerfers Nerfing Disease

Posted by Crankymonky on 29 November 2005 - 07:57 PM in Off Topic

Just saying I added another machine.

And Shinny, if you don't get some of those rigs up on this, it looks like I may pass you :ph34r:

Crank'

Guys, lets keep with this, we are almost in the Top 500.

#109842 Nerfers Nerfing Disease

Posted by Crankymonky on 07 June 2007 - 12:24 AM in Off Topic

Just a few reminders and notes.

Well, everyone keep on folding.

I know over time your machines may have F@H removed throughout formats. I know I am guilty of this. My main workstation hasn´t been folding for a long time since I stopped using SuSE 10.0 (quite a while). I just put it back on my main machine and will be checking the rest of the machines to get my folding processors back up to 5.

Congrats everyone, we are above cisco systems´ folding team. And that just kicks ass.

#70455 Nerfers Nerfing Disease

Posted by Crankymonky on 04 January 2006 - 10:25 PM in Off Topic

Passed ya Shinny. Running about 4 rigs down. Then again, you aren't using anything.

400th post, sure is a damn shoddy one at that.

#69198 Nerfers Nerfing Disease

Posted by Crankymonky on 14 December 2005 - 11:57 AM in Off Topic

Some random updates:
I realized one small machine I setup FAH for the other day didn't keep my settings, changed that through the client.cfg file.
My main rig is now running SUSE 10.0 and I have FAH running on it as of 2 minutes ago. I'm happy to say I checked the client.cfg file and my settings stuck.

#60758 Nerfers Nerfing Disease

Posted by Crankymonky on 31 July 2005 - 11:07 PM in Off Topic

Just got back from camping, kind of tired...Kind of worried...still says I only have 2 CPU's running it...will...check...logs...tomorrow...

Crank'

And 'grats on top 2000

EDIT: What's with the 100ghz Cluster? Now, if we could get condor running, we could do much more important things than FAH, like encode movies really fast. </sarcasm>

Edit 2: I just checked my machines, 2 of them were running as Anonymous, now all 4 are under my name

Watch out everyone, Crankymonky's score is about to go up fast!

#73841 Nerfers Nerfing Disease

Posted by Crankymonky on 22 February 2006 - 12:04 AM in Off Topic

A few MBR crashes later, my BIOS is my bootloader, and F@H is now running on another rig.

We're almost in the top 450 teams!

#58917 Nerfers Nerfing Disease

Posted by Crankymonky on 08 July 2005 - 09:16 PM in Off Topic

I noticed that on two of my machines, both running XP, 1 home 1 pro, that after a reboot I had the FAH core running at approximately 50% CPU under both my username and system. Maybe setting it to a service was a poor choice?

#60483 Nerfers Nerfing Disease

Posted by Crankymonky on 29 July 2005 - 08:59 AM in Off Topic

Hmmm, I'm still waiting for my other 3 CPU's to finish a work unit... Maybe I should check on those... Well, 100% CPU will be recieved for 3 days! Baelnorn, my victory is eminent! <g>

#59387 Nerfers Nerfing Disease

Posted by Crankymonky on 15 July 2005 - 12:02 PM in Off Topic

My explanation for not being on there:

Well, one of my computers is off semi-permanently for the time being at least.
The other machine's CPU is being used up by Dave's favorite online game-Knight Online.
And, my mom's machine would be more comfortable without it.

BUT!, I will get one CPU up on it once it arrives. That's a promise. I'll probably change my username to crankmyonky1 or something because machine ID 1-3 were taken and now not in use, or maybe I'll just start at 4. The machine is a sempron 3100+, and I hope to OC it to about 2.5 ghz from the stock 1.8.

EDIT: Hmm, I guess this should probably go into the poll thread. But I do hope to help you guys out once at least this thing arrives.

#58830 Nerfers Nerfing Disease

Posted by Crankymonky on 07 July 2005 - 10:35 AM in Off Topic

Fine, Fine, You get my PC's and a few of my friends. Once I get home from work. I think I'll put it on 7 machines. 1 AMD sempron 3100+, 1 athlon XP 2000+, 1 Celeron D 335 2.8ghx, 1 P4 2 gz, 1 P3 500mhz, and 1 P2(?) 335 mhz.

Crank'

#60337 Nerfers Nerfing Disease

Posted by Crankymonky on 27 July 2005 - 01:51 PM in Off Topic

I have it running now on 4 PC's, but only one has finished a workunit. I just realized that one PC didn't accept my settings and was set to Anonymous. I edited the client.cfg file for my name and this team, but lost my progress on the work unit. Well, I've had a lot of trouble getting this running, but I think it is setup now.

Crank'

#59444 Nerfers Nerfing Disease

Posted by Crankymonky on 16 July 2005 - 07:14 AM in Off Topic

C, you're gonna have to wait to see how the new sempron compares. Shipping was postponed! But guys, keep on keeping on! I did figure out why my machines were running two copies. After selecting it as a service, it loads up under "system" rather than "yourusernamehere" Then when I booted up, I probably started it again under my username. It runs under "system" for everyone once selected as a service and given a reboot, correct?

Crank'

Correction: It is still running under my Athlon XP 2000+ which I just got a powercable for.

#238574 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 25 June 2009 - 03:52 PM in General Nerf

Podcast #6

#236320 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 14 June 2009 - 09:15 PM in General Nerf

Foamtalk #5

No need to deal with megaupload.

#235638 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 11 June 2009 - 01:41 PM in General Nerf

The fourth podcast is now online, again.

Foamtalk Episode 4

Right click save as.

#241361 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 10 July 2009 - 09:13 PM in General Nerf

Podcast 7

#229937 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 12 May 2009 - 10:25 PM in General Nerf

Right clicking and selecting save as on the download link isn't working for me. Any itps?

Try this link.

Episode 3

Right click, save as.

For everyone else, using the other link allows for stats to be accurately measured. So please use that one, for now at least.

#246104 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 08 August 2009 - 11:42 AM in General Nerf

Podcast #10

#249694 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 05 September 2009 - 08:57 PM in General Nerf

Podcast #11

#247257 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 16 August 2009 - 05:53 PM in General Nerf

Badwrench has taken the time to re-encode all the Foamtalks. They are now significantly smaller, in terms of file size. I am unaware of any other changes. Audio Quality should not have changed noticeably. I will be keeping the older versions of the first 10 Foamtalks online, at least for the time being. This is so anyone who may be linking to them has a chance to update their links. It may be best for other sites to link to the NerfHaven or NerfHQ Foamtalk threads if you wish to link to the podcasts.

Foamtalk Episode 1
Foamtalk Episode 2
Foamtalk Episode 3
Foamtalk Episode 4
Foamtalk Episode 5
Foamtalk Episode 6
Foamtalk Episode 7
Foamtalk Episode 8
Foamtalk Episode 9
Foamtalk Episode 10

#227648 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 02 May 2009 - 11:48 AM in General Nerf

Is the general consensus that this one ran too long with too many off-topic "jokes," and that it would be improved by cutting some of it? If so, I will be putting up a revised version up shortly. If you have recommendations for segments that should be cut, please list them.

Bustaninja, I like the funny hat.

#245718 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 05 August 2009 - 10:33 PM in General Nerf

Podcast #9

#243441 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 23 July 2009 - 10:09 PM in General Nerf

Podcast 8

#224939 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 21 April 2009 - 09:59 PM in General Nerf

I like it. It would be better with a bit more editing, but hey, what wouldn't?

I understand the crack at me, and in all fairness, it was immature, without class, and whatnot, but really. I'm gonna call you guys out. You raved about not being immature and whatnot, but yet did nearly the same thing, in honestly a more rude fashion. I mean really... I wasn't hurting anyone, but you believe personal attacks on my character are necessary... Come on.

I was clearly being sarcastic and did not intend to take a crack at your character. Anything I may have said that could be seen as derogatory toward you regarding that post could have easily been applied to myself as well since I made a nearly identical post.

Sorry if you found it offensive, was just making a little joke about the joke you made about my joke.

And no, that isn't ambiguous at all.

I hope you accept my apology and acknowledge my jestful tone.

#227576 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 01 May 2009 - 10:19 PM in General Nerf

Episode two is finished.

Here

To save it, right click - Save as or Download link target, depending on your web browser.
To stream, left click.

#223645 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 14 April 2009 - 06:12 PM in General Nerf

I'd really like to help, but unfortunately, I am only 12 years old.

#224746 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 21 April 2009 - 02:22 PM in General Nerf

Those were youtube comments.

#224687 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 21 April 2009 - 02:13 AM in General Nerf

I think we had a solid pilot episode that highlighted the needs for technical changes, which will be instated for the next episode. Now hearing people's feedback is the best way to improve for next time.

We've considered doing "Live" show where there will be a method for "calling in." However, likely there would probably be editing at the end.

#224917 Foamtalk: A Nerf Podcast

Posted by Crankymonky on 21 April 2009 - 09:06 PM in General Nerf

^Doing stuff like that is just going to get you flamed dude.^

^Doing stuff like that is just going to get you flamed dude.^

Crankymonky's Content

By content type

See this member's

Sign In