Right, I got mine from a seller named amazing-box for future reference when the current listing expires.

http://www.ebay.com/...=STRK:MEBIDX:IT

I personally bought them when they were discounted 30% but at its current price darts are $0.0584 per dart.

This has a lot of information and seemed worthy of it's own thread, moved from pictures thread.

Thanks, I wasn't sure whether or not to so I went with the picture thread.

Also, I liked these darts so much that I proceeded to buy an extra 1000 darts off ebay after writing the review.

EDIT:

To make this post more worthwhile I ripped one of the tips of the dart and sliced it in half to give you guys a better idea what they're like.

So my order of China darts came in today so I had to test them out.

First thing I did was cut them down to 35mm in length so that they were similar in length to my MHA silicone dome darts. These darts have a bigger dart tip comparable to those that Xplorer produce, and the foam they are made out of is denser than that of NERF elite darts. These darts do weigh a noticeable amount more than MHA darts just by feel, but I don't have a scale cause I'm not a drug lord and I don't have any use for a scale that weighs .00 grams.

Then I tested them in an overhauled SM1500, Zorn's FAL2, and then a Plusbow. The FAL2 was fitted with the same hopper setup I've been using with MHA darts since 2013 so as to eliminate that as a variable for their hopper-ability. The Plusbow was fitted with an unmodified 1/2" PVC Wye hopper and a 12" CPVC barrel.

Both the FAL2 and Plusbow were fired 100 times and their record of fires to misfires were recorded, and the results are as follows:

China Darts

FAL2: 97/100

+Bow: 100/100

MHA Darts (Minor Cornstarch)

FAL2: 92/100

+Bow: 92/100

#6 Slugs

FAL2: 99/100

+bow: 100/100

The accuracy of these darts is superb; even out of a ridiculously overpowered overhauled SM1500 the darts didn't spin out and shot laser straight. The same can be said about the FAL2 and Plusbow.

As for range variance between these, MHA silicone domes, and Slugs... I didn't test it cause It's too cold and it honestly doesn't matter, but I would take an educated guess and say that these will out range MHA domes and slugs when fired out of the same blaster.

Pros:

• They seem to feed more reliably than MHA darts, but more testing needs to be done before this can be confirmed.
• Significantly more aerodynamic than slugs
• $0.05 per dart
• METAL FREE

Cons

• They're made with black foam which will make recovery a bit of an issue.
• They're more aerodynamic tip could inflict more pain compared to Slugs or MHA domes.
• You have to cut them down to make them hopper.

UPDATE:

I went back to mess with these today and see if I could get anymore data for you guys, and the black magic that hoppers work off of seem to have reversed over night. The darts decided to stop feeding in the regular wye yet continue to feed in the 3D printed Wye prototype that I got from Kane in 2013. I did Isolate a couple darts and dipped the tips in cornstarch and they seem to work again, but as most people know that's not the most convenient thing to do at a war (though I've been doing it for a couple years).

I have a couple different ideas as to why they decided not to feed anymore:

• I tested these darts in a much colder environment 20° Fahrenheit ambient temperature versus a 74° Fahrenheit ambient temperature. The darts were also much colder than they were this afternoon.


• The tips seem to have become more "rough" on the surface after firing them continuously at a concrete wall / wooden board.


• Black Magic... ("who knows how hoppers really work")

EDIT:

After some further investigation it seems that my barrel got screwed up by some black magic and that seems to have been the reason for the feeding issues. The barrel somehow managed to get shoved back causing a big lip to interfere with the feeding.

Cool, I have these too and was considering cutting them down and doing the same you did but just didn't. Also, I disagree that these hurt more than slugs, but I am not stating that it isn't possible that they can hurt more. Finally, although it doesn't matter too much, most people including me refer to them as either ACC darts, accurates, or Chunlin darts(after the seller on amazon were originally found) and while I don't mean annoying about it but it may help some to know what exactly these are called or at least have a name for these.

http://www.amazon.co...rts bullet head(where I bought mine)

I propose "Bullseyes" as the name for these cut down darts, since it sounds equal parts jargon and the original ACCurate name, while also being a play on words with the accuracy thing. It will make it easy to distinguish the full length ones from these since these are more than just cut-down streamlines, they are pretty much sili tips/silicone domes. Also, this is more activity in one topic than the darts and barrels forum has had as a whole in years.

The name "China Darts" was initially just a joke but I'm still going to refer to them as such since that's what the thread is titled.

My -2 cents.
That kid with the black recon is clearly some Ice Worshiping fucktard. All of these idiots who even decided to fucking talk to these reporters are morons. Now, we're going to see Uber Hard to mod guns coming out, cause Hasbro's gonna fucking flip out. Here we go, guys. Thanks a fuckin' ton.

That isn't certain. And besides, we could get around the "impossibles" to modify. The nitefinder tube was glued together, solution, cutting the pipe. I'm sure if hasbro even makes "unmodifiable" guns, we could find ways to get around them, just like the nitefinder.

Alright guys, I need some ideas on how the channel should work. I thought I might either have a community password so people could upload their own videos, but I didn't want people spamming the channel with bad-quality stuff. On the other hand, I could have a group of "channel leaders" (3-4 nerfers who like editing and are good at it) that could edit together clips that people post on a separate topic. This way, I have some help editing videos and we can keep the videos frequent. Any other suggestions?

The war is one week away, and there are still quite a few "maybes".
Bobbo + x
yBrik + x
Demon Lord

Please confirm your attendance. Also, we will have a pistols round, so bring one.

It doesn't need a cheek-diddle sheath because nothing flies forward when you fire it.

+Maybe a mod party at Cheerios' place someday

Thanks for the other information. Unless someone else has actual data on the specific tanks I will likely use 30psi for the Big Blast and Range Master.

@Draconis, It's interesting you say that, I haven't ever heard of those sorts of restrictions.

I think that's a bit silly though. A well made air blaster can be just as safe or safer than a powerful springer.
You just need to apply proper safety to construction.

The Nerf Dart Tag Snapfire 8 does not need to be primed. Is the Snapfire 8 too overpowered?