Jump to content

  2. → Viewing Profile: Posts: Foam Shooter

Foam Shooter

Member Since 02 Sep 2007
Offline Last Active Sep 01 2014 05:44 PM

Posts I've Made

In Topic: Big Salvo

14 December 2008 - 03:46 PM

You can just rip the ARs out and put the CPVC in the stock barrels. You would need to glue it in there to make it air tight.

In Topic: Pump Action Rifle

16 November 2008 - 05:34 PM

Rork: There will be a 1 1/4" Coupler attached to a 1/2" coupler in the thinwall PVC by screws. There will be a slit going back into the gun. When you pull the coupler towards you, like a pump action shotgun, it will bring the thinwall back which will bring the plunger head back, which will bring the catch back and compress the spring. The catch will catch on the clothespin trigger. At this point you push the 1 1/4" coupler back forward. The plunger head will stay in the same spot. Once the 1 1/4" coupler is at the front again you pull the trigger, releasing the catch, sending the plunger head forward, compressing the air in the empty space of the plunger and this will shoot the dart out of the barrel.

In Topic: A Teaser

16 November 2008 - 04:35 PM

That is very good looking. I was considering doing a bolt-action gun for a while but haven't gotten to it yet. I'll start a thread for my up and coming homemade soon. I'm assuming that your gun has a 1" thinwall plunger, right?

In Topic: My Bigbow

11 November 2008 - 04:43 PM

I'll try making it fire ball.

Carbon: Do you think that you could explain how you made yours shoot balls.

In Topic: My Bigbow

11 November 2008 - 01:25 PM

nerfboi: It costs < $20. The PC is the same about 13" including the bushing in it.

Meaker: I used a +Bow spring.

  1. NerfHaven
  2. → Viewing Profile: Posts: Foam Shooter
  3. Terms of Service and Privacy Policy
  4. Code of Conduct ·