Jump to content


Member Since 01 Sep 2009
Offline Last Active Sep 06 2018 08:29 PM

Posts I've Made

In Topic: Ideal air-flow characteristics for a 6-shot absolver?

06 September 2018 - 08:34 PM

If you have salvo tanks and pumping isn't a factor as you plan to use a compressor, why not just have 2 tanks operating three barrels each that fire off of a single blast button? Also, I would make the barrels the length of the dart plus however much you need to be able to have a conical shape.

In Topic: Straight Pistol Blaster, Help!

05 January 2016 - 09:08 PM

you could use a Secret shot pocket blaster and replace the barrel with flexible tubing to re-route the airflow to the top of your gauntlet.  The blaster is rather small to start and uses only a button as the trigger.  Another option could be to use a hornet tank with a blast button.  This would also keep the trigger rather small and allow for airflow to be routed easily through the flexible tube.  The only thing is that both of these solutions would require a pump as they are air blasters as opposed to springers.  I do however believe that a back pressure air blaster is going to be the most compact opption that will be the easiest to have a remote trigger without an elaborate system of pulleys or electronics.

In Topic: War footage

26 November 2015 - 10:23 PM

Did you even try?

In Topic: Who's still around from 2008/2009

24 November 2015 - 08:59 PM

I joined back in '09, however I have been primarily a lurker and I no longer do too much nerf related stuff.

In Topic: Homemades Picture Thread

17 May 2015 - 05:54 PM

I Finally finished building my shorted pump snap.

Posted Image

It is just over 24" without a barrel. The design was inspired by Dan Beaver's Don Quixote and snakerbot's shortend pump snap. It also has an anti face diddle sheath.