NerfBounty

Hey everybody,

I recently salvaged my Airtech 3000 that had been commissioned by RyanMcNumbers. A while back one my friends had tweaked the pump in a way that whenever I pumped it, no air would be pressurized into the tank. I replaced the old Hornet pump with a new one and can now fire the gun again, however it now takes 10 pumps to achieve the same pressure as when before it only required about 4. My theories are that my friend has previously slightly over pumped it or that there is a leak somewhere. Any other suggestions? Thanks in advance.

Hello everyone,

I'm not the most advanced modder so to speak yet I do take a strong interest in looking around the forums and modding my own guns to my ability. Recently my friends and I have been debating on what color to paint our longshot and with what paint? The popular decision is to go with classic only spray paint methods. I on the other hand find it to plain and fancy the hand painting worn out look (similar to dry brush). It's hard to explain the exact look I'm describing but if any of you are familiar with DirectThreat's work he is a good example of the work I've been describing. Now I have done dry brushing before and spray painting and a few decals with the old games workshop paint and was wondering if there are any guides/videos on how to attain this style and if the new citadel paint on games workshop would be useful. Any feedback would be helpful! Thanks in advance.

I'm looking for a camera that you would be able to either mount on top or beneath my gun. It would also be able to be easily transfered on to my computer for editing. Also the lowest price would be best. I've already checked out Angel's glasses cam but that is a little much. Any links or thougths would be helpful.

I am currently working on an Angel Breech and came across the problem that the left part of my breech was to far to the right (the lip was protruding). I foolishly didn't check before I super glued it into the dart chamber with Gorilla Glue (I don't recommend, It foams). Therefore, i was wondering how I can remove the left part of the breech from the dart chamber.
Thanks

Yesterday, I was using my 2k knowing that over 4 pupms was dangerous to the gun. Then I pumped it three times and then fired. THe next shot did not hold pressure the pump would just slide wihtout building air pressure. I opened it up to see nothing wrong with the leaks ,but am wondering if I broke the back of the pump shaft because it seems to be a bit cracked. Did I break the overpressure valve? Pics if necessary.
Thanks!