Eboreg
Member Since 23 Dec 2007Offline Last Active Private
Find content
Topics I've Started
My Firefly Won't Fire
21 May 2010 - 11:19 AM
I replaced my Firefly's barrels with CPVC but when I try to fire it, the darts won't come out. The plunger will slam against the end of the tube but the dart doesn't come out. Can anyone help me here?
Tek 6 Barrel Replacement
10 October 2009 - 03:26 PM
If any of you bought a Tek Six recently, you'll know that Z-man12's mod won't work on the redesigned turret. However, I devised a mod to help with the new turret.
You need:
* Tek Six turret
* hacksaw
* pliers
* rubber bands
* barrel material of your choice (preferably PETG)
First off, you take the turret out of the gun.
Secondly, you remove the pegs with a pair of pliers, (if you haven't already)
Thirdly, you cut the turret so it looks like this
except all the way around
Finally, you slap whatever barrel material you want in there. I haven't tried it but I recommend PETG since it's the most likely candidate to fit.
As a bonus:
I banded my gun!
You need:
* Tek Six turret
* hacksaw
* pliers
* rubber bands
* barrel material of your choice (preferably PETG)
First off, you take the turret out of the gun.
Secondly, you remove the pegs with a pair of pliers, (if you haven't already)
Thirdly, you cut the turret so it looks like this
except all the way around
Finally, you slap whatever barrel material you want in there. I haven't tried it but I recommend PETG since it's the most likely candidate to fit.
As a bonus:
I banded my gun!
