Jump to content

psycho p88

Member Since 11 Aug 2012
Offline Last Active Oct 16 2012 10:50 PM

Posts I've Made

In Topic: Rampage BuzzBee LongShot Attachement

29 August 2012 - 05:44 PM

Uhh... use your words? I'm assuming that you attached the internals from an airgun to the side of your rampage. Please elaborate.

Not too much to elaborate, the internals of the Range Master slides right on to the side of my Rampage ( without having to sand, grind or glue anything)

The whole thing is on there pretty good, only way it goes on is SLIDING from top to bottom, it will NOT PUSH IN!

The Range Master barrel assembly still rotates, so the trigger can face up, down, sideways.

What else do you want to know?

Important note; You should only use the thick yellow rounds with the Range Master.

Also, during pumps it will want to slide forward, but all you have to do is hold it steady at the top.

In Topic: NERF Sharpshot Modification

24 August 2012 - 06:48 PM

I noticed you didn't reinforce the bolt lock. When I added new springs to mine, after about 50 shots the plastic just bent away to a point where the spring wouldn't lock back anymore.

ended up having to fit some 1/8" thick aluminum L brackets with some JB cold weld.
Posted Image

Posted Image

Posted Image

In Topic: Vulcan Electrical Troubles

15 August 2012 - 03:31 AM

Have you taken the thing apart and checked if the motors still function?