Hotglue gun (Plus glue)
1/2" PVC coupler
Here is are Titan:
Now we need to open it up, but there is a orange piece down by the end that we need to Dremel or hacksaw this piece. When you are done it should look like this:
Once we have the gun open we can get to work.
First you need to take the barrel off by just twisting it. Then after you have the barrel off you need to cut of the front end of it so those pesky grates in the front are gone. When you are done with this it should look something like this:
We can put the barrel aside for now so we can work on the front nozzle where the barrel came off.
We need to Dremel these grates until it looks like this:
Now that is done we need to put back the original barrel back on the gun.
Now we need to get back to the orange barrel. Take your PVC and cut it down to about 10 through 11" and put a coupler on the end. Like this:
After that is done put the end of the PVC with the coupler on down the barrel so the end without the coupler is showing. Now take some FBR and wedge it around the PVC until it is snug, like this:
Take your 12" PETG and put some tape near the front. Then nest the PETG in the PVC so it looks like this:
( Sorry for the blurry image )
After you put the tape on the front end of the PETG put some tape on the back end to, so it looks like this:
Now the tape on the back end is there so it will fill the dead space between the PETG and the coupler, but evan with the tape there there is some dead space. So now we need to put the coupler on the end and glue it like this:
Now that we have glued the coupler and the PETG together we need to wrap tape around the coupler until it is vary snug in side the orange barrel.
Now put the gun all back together. After you put the gun back together put some hot glue around the FBR and the PVC so it looks like this:
After that put some hot glue around the neck of the PETG like we did with before.
Now you are done!!!! It should look like this after you are done:
Ranges are really good. They usually hit 165-170' at 17 pumps.
Thanks to FA_24 telling me to wrap the coupler and PETG in tape the gun range increased a lot.
Edited by Dayko, 13 October 2007 - 05:15 PM.