Jump to content


Photo

Nitefinder Cocking Slide


10 replies to this topic

#1 nerfturtle

nerfturtle

    Member

  • Members
  • 223 posts

Posted 22 September 2007 - 06:17 PM

After seeing boom13's clipped nf, I decided I wanted to try my own. The only thing that annoyed me about his design was not the fact that it didn't work, but that you had to prime the barrel after every shot. After a little bit of thinking about the subject, I started work on it, and a little while later this came out of it.
Posted Image
I know it's not pretty, not one bit, but that doesn't get me down at all. I'm happy it works.
Here is where the slide makes contact with the plunger handle.
Posted Image
And here is a video of it working.
Posted Image
Hope to see this with an automated magazine very soon.
  • 0
The tough coughs as he ploughs the dough.
-Dr. Suess

#2 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 22 September 2007 - 06:21 PM

Wow! This "Makes me wanna' LA LA!" But really. That looks so good. I can't wait to do it to mine. After I finish my homemade. You know what? Fuck that I'm going to incorporate this into my homemade.
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#3 Gengar003

Gengar003

    Member

  • Members
  • 187 posts

Posted 22 September 2007 - 07:07 PM

I had a similar thought-process as you after seeing the LS-clipped NF. Thanks for a little visualization :wacko:.

The question is, can a clip be fit on a barrel airtight-enough so there's no need for a closing breech? If not, how's the closing breech to work - separate, forward-back motion, separate back-forward motion, or integrated into the cocking slider like the longshot?

That was my thought-process. I probably won't act on it for a while though (busy with Disk shot guns), so kudos to you for actually doin' it.

Are you going to stop here, or are you going to put a LS clip on it? Also, does the slider move back forward on its own like the Maverick/Crossfire, or do you have to push it back forward?
  • 0
I bought Kohls.com's last two AirTech 2000s.

#4 nerfturtle

nerfturtle

    Member

  • Members
  • 223 posts

Posted 22 September 2007 - 07:20 PM

I am pretty sure that you need a breech for this. I know you made a breech-less EAB, but the EAB's plunger is far larger than that of a nitefinder's, and you were only getting ranges in the 40s. It will be integrated into the slide, so The ROF will be quite insane. As of right now, the slide doesn't return to its foward position, but that can be easily solved by putting a pull spring in there.

Edited by nerfturtle, 22 September 2007 - 07:23 PM.

  • 0
The tough coughs as he ploughs the dough.
-Dr. Suess

#5 Zaxbys

Zaxbys

    Groove's Protégé

  • Members
  • 510 posts

Posted 22 September 2007 - 07:26 PM

Could we get some internal pics of the slide system?
  • 0
QUOTE
"Bitces be crazy"


QUOTE
"Hey girl... you like water sports?"

~Groove 6/26/09

#6 Shorty

Shorty

    Member

  • Banned
  • 157 posts

Posted 22 September 2007 - 07:36 PM

Yeah man thanks for the idea. Now Im going to attempt the same thing but put my scout to use. :wacko:
I love imports.
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."

#7 nerfturtle

nerfturtle

    Member

  • Members
  • 223 posts

Posted 22 September 2007 - 07:39 PM

There are no internal pics, the only important part is the bar at the back of the slide.
Just so everybody knows, I used the clear tube from the RF20 as the slide.
  • 0
The tough coughs as he ploughs the dough.
-Dr. Suess

#8 Zaxbys

Zaxbys

    Groove's Protégé

  • Members
  • 510 posts

Posted 22 September 2007 - 07:42 PM

Does the slide automatically retract once pulled?
  • 0
QUOTE
"Bitces be crazy"


QUOTE
"Hey girl... you like water sports?"

~Groove 6/26/09

#9 nerfer34

nerfer34

    Member

  • Members
  • 1,594 posts

Posted 22 September 2007 - 09:38 PM

I love your mods. I have the exact same thinking process/ideas as you. It's wierd.
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->God Damn it Groove, you stole my kill.<!--QuoteEnd--></div><!--QuoteEEnd-->-OMC

#10 zaphodB

zaphodB

    Member

  • Members
  • 369 posts

Posted 22 September 2007 - 10:45 PM

I actually like how it looks. It looks like it's a cobbled together mad-scientist gun.
  • 0
Alice came to the fork in the road.
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."

#11 Maeric

Maeric

    Member

  • Members
  • 386 posts

Posted 23 September 2007 - 11:32 AM

NerfTurtle? Why the fuck do you always come up with things that i want to do, or am planning on doing? Jeez, have some compation...

But really, nice job. Its kinda sloppy tho.
  • 0
Active on H3Artificer as Halacar. GT: Halacar send me an invite if you wanna forge.
I'm amazing at Forza3! I destroyed the engine of a 2mil C car by downshifting! YAY!
I hate you. And all noobs who are like "OMFG i r liek, glued sh1t 2 shit. jak offf ma ego. NAOW!"


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users