11 replies to this topic

[Liam]

Now, I was bored in my room a few days ago, so I decided to open up my sneakshot and try to make that piece of crap better. Heres what I did: (sorry about the lack of pictures, camera broken)

Materials-

-pretty thin flathead screwdriver
-Nerf Sneak Shot
-Saw/dremel
-1/2 inch PETG (optional)

Alright, first off take that pretty thin flathead screwdriver and stick it down the barrel of your sneakshot to where you see the X that the barrel post comes off of. Stick the screwdriver somewhere inside of that X and twist until the whole barrel post comes out. Now take that adorable saw/dremel of yours and cut off about 1 inch off the front of the barrel. Now take the PETG (if you want) and shove it down your shortened barrel. Hot glue around the edge of the barrel. I did not do this last step because I didn't have any PETG. Now you've got a beautiful sneak shot that gets ranges of around 50-60ft.

This is my first mod write-up so go easy on me . Questions, comments?

Edited by Liam, 08 August 2009 - 01:54 PM.

[the essence of death]

Sounds great but how bout some pics?

[Liam]

Sounds great but how bout some pics?

Thanks . I'm sorry about the pictures. My camera is kind of broken, but I'll try to get some pics up soon.

[Liam]

Got some pics up:
http://i219.photobuc...95/DSC02480.jpg

http://i219.photobuc...95/DSC02483.jpg

[lego101]

Umm... hate to break it to you but thats not a sneakshot. That is a secret strike pocket blaster or sspb. Here is a sneak shot mod http://nerfhaven.com...topic=8651&st=0

[Dayko]

Nice mod. This isn't the first mod on this gun, Gengar003 did one. Here
Also not to be ragging but it isn't called the sneak shot, its called "Secret Strike Pocket Blaster" or SSPB for short.

Edited by Dayko, 09 September 2007 - 02:14 PM.

[Liam]

Alright thanks for the comments guys. I was looking around the website to try and find out what the SS on the gun stood for, but i couldn't find anything. That's why i just said "sneak shot" . Sorry about that. By the way I'll most likely be putting a crayola barrel of some sort in this. So prepare for more to be added to this write-up.

Edited by Liam, 09 September 2007 - 04:24 PM.

[foamforce123]

Oh man, don't put a crayola barrel on it. With the Secret Strike Pocket Blaster's little power, I doubt that the dart would even leave the barrel with a crayola. I'd use CPVC or PETG.

[Carbon]

Oh man, don't put a crayola barrel on it. With the Secret Strike Pocket Blaster's little power, I doubt that the dart would even leave the barrel with a crayola. I'd use CPVC or PETG.

The SSPB has more power than you think...my crayola'd SSPB gets about 40'.

[frost vectron]

In my experience, crayola barrels are loose in comparison to PETG or CPVC barrels. I'm not sure why a loose barrel would be bad for a weak gun.

[Liam]

Quote- Carbon
The SSPB has more power than you think...my crayola'd SSPB gets about 40'.

Well if your crayola'd gets around 40 ft then I really don't think I will crayola mine. Right now my SSPB without crayola's gets around 60ft. So, I'm just going to keep it the way it is and take foamforce's advice.

Oh, and I almost forgot, last night I painted it a silverish white and a grey black.


Thanks againg for the comments guys.

Edited by Liam, 10 September 2007 - 02:24 PM.

[southpaw]

90+ft.