10 replies to this topic

[BigFootWitness]

Hello, I am interested in modifying/upgrading my Nerf Rapid Fire 20. What do you guys suggest I do? Also for some reason after a while of not using it I grabbed it and started pumping it but i get no pressure and i'll pump it like 50 times and i'll only get like 5 shots? Is there a leak inside or something?

please reply,
Thank you!

[foamforce123]

I'd suggest you go to the Modification Directory, link here----------->Modification Directory Also your Rapid Fire 20 probably has a leak. I'd take it back and get a new one before modifying it.

Edited by foamforce123, 24 August 2007 - 09:58 AM.

[Carbon]

Beyond that, just do a search for RF20 mod (or modification) in the Modification forum.

[BigFootWitness]

I'd suggest you go to the Modification Directory, link here----------->Modification Directory Also your Rapid Fire 20 probably has a leak. I'd take it back and get a new one before modifying it.

oh yeah i see, thank you!

Yeah um can I do the HPA mod that the "Eyes of Fire" has with my Rapid fire? Since my pump doesn't work or no?

[shadowkid33]

I'd suggest you go to the Modification Directory, link here----------->Modification Directory Also your Rapid Fire 20 probably has a leak. I'd take it back and get a new one before modifying it.

oh yeah i see, thank you!

Yeah um can I do the HPA mod that the "Eyes of Fire" has with my Rapid fire? Since my pump doesn't work or no?

You could, but there are two problems. 1) Do you have enough experience to succesfully do that?
2) FA said he spent $250 on that, would you be willing to spend that much cash?

[Z-man12]

Yeah um can I do the HPA mod that the "Eyes of Fire" has with my Rapid fire? Since my pump doesn't work or no?

I wouldn't try it but there really is not need unless you really want to do this one. If you do then maby make a PVC ari backpack like Captian Slug's. Other then that the only upgrades you can really do is strip the black caseing off, replace the barrels with your favorit materials, and remove the selective fire switch with a tube coupler.

[BigFootWitness]

You could, but there are two problems. 1) Do you have enough experience to succesfully do that?
2) FA said he spent $250 on that, would you be willing to spend that much cash?

I am an experienced paintball player and have plently of stuff, I have all I need to convert it to do this and i have all the knowledge needed, I won't be spending 250 on this. I was just wondering if i could do this to it since the pump already has a problem (I was thinking it was a leak and somebody else here said the same.

Thank you!

[Pineapple]

I am an experienced paintball player and have plently of stuff, I have all I need to convert it to do this and i have all the knowledge needed, I won't be spending 250 on this. I was just wondering if i could do this to it since the pump already has a problem (I was thinking it was a leak and somebody else here said the same.

Thank you!

You don't need our permission. Go for it!


It's nice to see when folks attempt another's modification; I know that would bring satisfaction to F_A24, knowing his mod allowed someone elses' leaky RF20 to have new life!

Another kid once did a HPA conversion on his Wildfire (predecessor to the RF20). Don't know what he had his regulator set at, but the YouTube video showed all 20 darts being spit out in about one second. It was pretty cool.



-Piney-

[DragonFire]

Since this topic is still active, does ANYONE have any vids/pic of getting that fuggin' black thing off the back without sawing the blighter off? I've already given up on one and am proceeding to sawing the grey piece off before I mangle the thing too badly. I know Forsaken said that he used lighter fluid, but there's also a grey peg on the underside of the black thing and wanted to know how he got around that. (That, and I don't like using lighter fluid. I do most of my work inside and I don't want to worry about fumes of anything like that.)

That, and I also must say that this particular point isn't covered in ANY of the main parts of the RF20 mods. (At least, not that I saw, and I've checked all three of them several times.)

Edited by DragonFire, 25 August 2007 - 11:50 PM.

[keef]

How do you usually open up guns?
Its called a screwdriver.

Nevermind, I thought you meant something else.
Go to the Mmich page, or Den of Foam, or Bike inner tube over the bladder.

Edited by keef, 26 August 2007 - 08:17 AM.

[DragonFire]

Den Of Foam's instructions:

Part I:
To begin, unscrew the two halves of the big black part of the shell and set it and the yellow dial aside. Now, unscrew the large grey part of the shell, and lift off the half of the shell on top (barrels pointing right.) Lift out the barrel assembly. Take your screwdriver and unscrew the screw in the front center of the barrel assembly. Now unscrew the screws on the back of the barrel assembly. Pull the barrels off of the base of the assembly, and watch as twenty air restrictors come falling out. These people need to get a grip... Anyway, throw them away. All of them. Now, put the barrel assembly back together without the restrictors, and screw it all back together, front and back. Now your Rapid Fire 20 can shoot stefans, and doesn't have a bunch of annoying air restrictors hindering the air. Yay...

Essentially, you pry the grey halves apart and then try to work with it...


And for the other two, TEH GOOGLES!!! ZEY DO NUZZING!!! Ahem, sorry. Couldn't resist. So if you could, I would really appreciate a link or two. And my PVC Cutting/Shaping wheel for my dremel works really well in cutting apart plastic, but I still kinda want the gun to "look pretty"...

WHY MUST THE REALLY COOL MACHINE GUN BE SUCH A BITCH TO GET OPEN?!?! IT'S NOT FAIR!!!