First was my Airtech 2000 Single Barrel "Recorder" replacement.
Thread --->Here
Video--->Here
My Second was my Airtech 2000 Double "Recorder" barrel replacement.
Thread --->Here
Video --->Here
And the newest of all is my Blast Bazooka placement switcharoo. I was following the modding instructions of Cartoon so i cut off my Blast Bazooka's barrel. And hot glued the pump shut like in Cartoon's Now i wasn't really thinking so I tried putting one of my recorders as the barrel just tell i get some brass or something. It sucks so i gotta get some brass. But the main picture is on the Airtech 2000. So i got this sawed of barrel just waiting to be used. So i took of the recorder barrel of my Airtech (No biggie i can jam it right back on on) and Hot glue that sucker on to my Airtech.
Oh, now i had a bit of trouble though. I wasn't thinking and i super glued my recorder to the Airtech but it didn't dry quick enough so it dribbled down the gun and super glued some insides of my gun together so in my video you can see i sawed off a huge chunk of the top of my gun so i cut the the plastic pieces inside stuck together.
Ranges ---> Stream Line
91 "11
93 "2
90 "9
Ranges ---> My homemade Hot glue darts
96 "5
97 "7
93 "2
My Newest Airtech Barrel Replacement Video ---> Here
The last part of my mod is i made two new darts. Probably not as good as Stefan's cause I've never tried with them but i think mine are just as good.
First Bullet - My Prototype - Simply a dart with some e tape at the top.
Second Bullet - A Regular ripped up dart. The cylinder foam of a dart just without tis Velcro top or suction cup top on it. Instead i evenly hot glued the top of the dart so it melts the foam down equally and hardens. The only down side is about after 4 shots of this the hot glue starts ripping threw the foam. My darts keep ripping a part because of how hard they keep hitting the walls.
My Hot glue dart video ---> Here
Edited by Nerf Nerd, 23 August 2007 - 09:28 AM.