Well is it possible to do an ABBB and still have the ability to fire arrows?
8 replies to this topic
#2
Posted 17 August 2007 - 08:43 PM
Just make the outer barrel of the breech have the correct OD to fit arrows.
The tough coughs as he ploughs the dough.
-Dr. Suess
-Dr. Suess
#3
Posted 17 August 2007 - 08:43 PM
Yes. If you add the arrow over the Brass it should fit... If not who cares?
You got a $20 Nerf gun shooting 60-75 ft with a 6-shot clip.
You got a $20 Nerf gun shooting 60-75 ft with a 6-shot clip.
Timothy M-Lick <3
#5
Posted 17 August 2007 - 08:55 PM
I see... Well, It fits 1/2 PVC tight but you sand it down with a sanding sponge a lot.
Timothy M-Lick <3
#6
Posted 17 August 2007 - 09:14 PM
Or lathe. But I don't know why you would want to.
We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34
You know what... I know it's kinda late... but Props Cole.
-Baghead
-Nerfer34
You know what... I know it's kinda late... but Props Cole.
-Baghead
#7
Posted 18 August 2007 - 06:41 PM
I have just the solution! Mostly because i did this to my BBB
This is my CPVC breeched BBB with the "arrow attachment" i made.
All you have to do is take some 1/2" CPVC and and it down until it fits VERY tightly in the original orange barrel that you cut off earlier (I hoped you saved it) and hammer the CPVC in the orange barrel. It should fit so tightly that it doesn't need any glue or anything.
This is my CPVC breeched BBB with the "arrow attachment" i made.
All you have to do is take some 1/2" CPVC and and it down until it fits VERY tightly in the original orange barrel that you cut off earlier (I hoped you saved it) and hammer the CPVC in the orange barrel. It should fit so tightly that it doesn't need any glue or anything.
#8
Posted 19 August 2007 - 02:35 AM
That's a coupler mod, not a breach.
If you want to do this, then you will have to fire the arrow when the magazine is empty (I.e.: before you load it or after you fire all the darts). Otherwise, the loaded dart will be closed in the breach when the weapon is cocked, because that's how an ABBB breach works. That would mean that the dart would push out the arrow, which would be a pointless waste. Also, if you were to do this on an ABBB, then the air pressure would drop before it hits the arrow because of the long barrel.
If you want to do this, then you will have to fire the arrow when the magazine is empty (I.e.: before you load it or after you fire all the darts). Otherwise, the loaded dart will be closed in the breach when the weapon is cocked, because that's how an ABBB breach works. That would mean that the dart would push out the arrow, which would be a pointless waste. Also, if you were to do this on an ABBB, then the air pressure would drop before it hits the arrow because of the long barrel.
The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#9
Posted 19 August 2007 - 09:13 AM
ok then im sorry, i misunderstood.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users