Turret For Coupled Guns
#1
Posted 14 August 2007 - 10:52 PM
Be hold my coupled Maverick barrel:
Sorry Thats I didn't post a write up about this but it is really easy too do.
First you need too take out the barrel from the gun, then unscrew every screw from the barrel and then take the pieces apart. Cut the orange piece of the barrel down the the groove's. Then make sure that your half inch CPVC is able too fit through it. Then ( depending on what type of gun you are going too use this with, this step can be reversed) take your CPVC and put every other one higher and lower then the other one. Then hot glue the barrels in place then your good. Again sorry that I didn't do a picture write of every step.
< One foot in death...The other in life. >
#2
Posted 14 August 2007 - 10:56 PM
EDIT: Making myself look less idiotic.
Edited by penguin807, 14 August 2007 - 11:03 PM.
#3
Posted 14 August 2007 - 10:58 PM
penguin807: This wouldn't work in a Nitemav. It's not what you think it is.
Edited by SHADOW HUNTER ALPHA, 14 August 2007 - 10:59 PM.
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#4
Posted 14 August 2007 - 10:59 PM
< One foot in death...The other in life. >
#5
Posted 14 August 2007 - 11:02 PM
penguin807: This wouldn't work in a Nitemav. It's not what you think it is.
Yeah I realised that after I posted. Then I realised that the whole "what are the ranges" question was stupid. I'm tired. Could you tell?
#6
Posted 14 August 2007 - 11:05 PM
Speedloaders work best with a longer barrel.
This is unless I'm..... Oh.
So this is an alterative to the in-line configuration.
Cool.
The only problem I see is if the coupler can hold up the whole turret and still be holding it up straight.
Kickass paintjob by the way.
Edited by bobafan, 14 August 2007 - 11:06 PM.
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#7
Posted 14 August 2007 - 11:54 PM
#8 Guest_DarkInfection_*
Posted 15 August 2007 - 06:31 PM
#9
Posted 15 August 2007 - 07:43 PM
#10
Posted 15 August 2007 - 07:57 PM
#11
Posted 15 August 2007 - 11:43 PM
It looks good, how'd you manage that paint job?
I painted the whole thing in red then I took a Fern leaf ( Which I bought at my dollar store, cause then they last longer) and wrapped it around then sprayed white over it.
< One foot in death...The other in life. >
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users