#26
Posted 17 August 2007 - 05:34 PM
#28
Posted 17 August 2007 - 07:12 PM
I have a few questions:
1. What's holding the Spidey guns in there?
2. What are the ranges of the Spidey guns?
3. Is it easy to bend that 1/8" brass to the shape you want?
4. Would It be possible to connect the Spidey guns to the LBB pump, and have both guns use that pump?
5. I'm assuming that's Petg. Can it fire stock darts, or is it Stefans only?
6. What did you use to connect the two Spidey guns to one pump?
7. Do you ever have trouble with darts from the Spidey guns hitting the LBB's main barrel as they fire?
This gun is awesome. Great Job, KBarker!
Probably dead by now, or something.
#29
Posted 17 August 2007 - 10:05 PM
This is truely amazing KBarker. I just have to do this. I have an LBB that is currently un-used, an old SM3K pump, and I'm about to have a set of the Spidey guns.
I have a few questions:
1. What's holding the Spidey guns in there?
2. What are the ranges of the Spidey guns?
3. Is it easy to bend that 1/8" brass to the shape you want?
4. Would It be possible to connect the Spidey guns to the LBB pump, and have both guns use that pump?
5. I'm assuming that's Petg. Can it fire stock darts, or is it Stefans only?
6. What did you use to connect the two Spidey guns to one pump?
7. Do you ever have trouble with darts from the Spidey guns hitting the LBB's main barrel as they fire?
This gun is awesome. Great Job, KBarker!
1. Hot glue. Lots of hot glue. They fit in the opening of the LBB like they were meant to go there, and they are tight on the larger tube that goes around the barrel. I believe it is 3/4" thin-wall PVC.
2. Don't know. I don't think it's nearly as far as Falcon and Baghead have been getting though, probably 40-50 feet.
3. No, it was a pain. Something more flexible would be easier.
4. No idea.
5. Yes, PETG. I don't use stock ammo much, it should still fire.
6. A Rain Drip tee connector
7. No.
Could you please elaborate on the trigger system.
Not sure what needs to be elaborated, there is a brass tube that runs from the spidey trigger tubes to the keyring, with a cable inside it. The cable is connected to a small piece of plastic that links the trigger buttons together. Pulling on the cable pushes the buttons in.
#30
Posted 17 August 2007 - 10:16 PM
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#31
Posted 17 August 2007 - 10:50 PM
Anyway, That's a great mod.
So you see a penguin walking down the street. Looks harmless right, so you keep on walking past him. You turn around to seem him walk away, only to find yourself staring down the barrel of a .38 revolver.
#32
Posted 18 August 2007 - 12:34 AM
#33
Posted 18 August 2007 - 01:14 PM
You could probably just hook up the pump to all three. I don't see why it wouldn't work.
The LBB pump doesn't have any tubing you could t-off, so you'd have to epoxy something directly into the LBB pressure chamber. Also, you'd need to install a seperate one-way check valve somewhere in the line between the pressure chamber and the trigger block to keep it from operating like a Volley titan.
Finally, I'm pretty sure the LBB is rated for more pressure than the Spiderman guns are, and there would be no way to isolate them.
#34
Posted 18 August 2007 - 03:44 PM
The LBB doesn't have a valve between the pump and pressure chamber? I thought all air guns did.You could probably just hook up the pump to all three. I don't see why it wouldn't work.
The LBB pump doesn't have any tubing you could t-off, so you'd have to epoxy something directly into the LBB pressure chamber. Also, you'd need to install a seperate one-way check valve somewhere in the line between the pressure chamber and the trigger block to keep it from operating like a Volley titan.
Finally, I'm pretty sure the LBB is rated for more pressure than the Spiderman guns are, and there would be no way to isolate them.
#35
Posted 18 August 2007 - 03:46 PM
The LBB doesn't have a valve between the pump and pressure chamber? I thought all air guns did.You could probably just hook up the pump to all three. I don't see why it wouldn't work.
The LBB pump doesn't have any tubing you could t-off, so you'd have to epoxy something directly into the LBB pressure chamber. Also, you'd need to install a seperate one-way check valve somewhere in the line between the pressure chamber and the trigger block to keep it from operating like a Volley titan.
Finally, I'm pretty sure the LBB is rated for more pressure than the Spiderman guns are, and there would be no way to isolate them.
Not sure what you mean by valve, but the LBB internals are just one large piece of plastic. No vinyl or other tubing.
#36
Posted 18 August 2007 - 04:36 PM
For maximum efficiency?
1. Pump up. Count how many pumps.
2. Keep going until you hear a loud "bang".
3. Subtract one pump from the total. Rebuild your air bladder.
There you go.
#37
Posted 18 August 2007 - 08:10 PM
#38
Posted 19 August 2007 - 12:19 PM
"Which road do I take?" she asked.
"Where do you want to go?" responded the Cheshire cat.
"I don't know," Alice answered.
"Then," said the cat, "it doesn't matter."
#39
Posted 15 September 2007 - 10:34 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users