When making stefans, part of the process is to put the FBR pieces into the dryer to harden them. Will it help if I do that stock Micro Darts?
P.S. I searched and checked the stickies in both the Homemade forums and the Modifications forums and couldn't find anything about this, so don't flame about that.
Darts In The Dryer?
Started by Nerf Master 101, Aug 06 2007 05:12 PM
13 replies to this topic
#2
Zaxbys
-
- Members
- 510 posts
Groove's Protégé
Posted 06 August 2007 - 05:16 PM
When making stefans, part of the process is to put the FBR pieces into the dryer to harden them. Will it help if I do that stock Micro Darts?
P.S. I searched and checked the stickies in both the Homemade forums and the Modifications forums and couldn't find anything about this, so don't flame about that.
I have never heard of putting FBR into the dryer to harden it but putting the FBR in the dryer does straighten the foam so you can make quuality darts. So to answer your question no I don't think putting the stock micros in the dryer would have much, if any, affect on the darts' performance.
QUOTE
"Bitces be crazy"
QUOTE
"Hey girl... you like water sports?"
~Groove 6/26/09
"Bitces be crazy"
QUOTE
"Hey girl... you like water sports?"
~Groove 6/26/09
#3
b00m13
-
- Members
- 386 posts
Member
Posted 06 August 2007 - 05:20 PM
Can you toss 1 dart in the drier to see for yourself?
Then post the results here when you're done.
Then post the results here when you're done.
The only place Wal-Mart exists in New York, is in our TV's.
#4
Guest_yourface_*
Guest_yourface_*
-
- Guests
Posted 06 August 2007 - 05:40 PM
No! Don't do this! Have you every seen a little warning in the dryer, telling you not to put flammable materials in it? Stock dart tips are rubber; rubber is flammable! I'm not sure about the safety of drying foam, but people do it all the time, so it's probably okay.
I'm sorry if I seemed rude, but it's a really bad idea.
I'm sorry if I seemed rude, but it's a really bad idea.
#5
Nerf Master 101
-
- Members
- 15 posts
Member
Posted 06 August 2007 - 05:56 PM
rubber is flammable!
No it's not. Rubber melts, but it won't burn. How long do you thing I should put 1 dart in for?
My Pokemon site: Clicky!
QUOTE(Retiate @ Aug 13 2007, 11:43 PM) 
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
#6
Guest_yourface_*
Guest_yourface_*
-
- Guests
Posted 06 August 2007 - 05:59 PM
Oh, sorry. The melting rubber will probably fuck up your dryer, though. If you want to go through with this, I recommend pulling the tip off, heating the foam and putting the tip back on.
#7
NerfMonkey
-
- Members
- 1,821 posts
Member
Posted 06 August 2007 - 06:22 PM
Why would you want to straighten a stock dart? The only reason people put FBR in the drier is because it comes on a coil and needs to be straightened; unless you get your stock micros off a coil I see no need to put them in the drier.
SexD Warves
#8
Kid Flash
-
- Members
- 1,985 posts
Member
Posted 06 August 2007 - 06:50 PM
In deed rubber is flamable. I start campfires with rubber floor mats from a car. Its a very bad idea to dry rubber in the dryer.
I edited this post for gramar mistakes. Im sorry OMC.
I edited this post for gramar mistakes. Im sorry OMC.
Edited by Kid Flash, 06 August 2007 - 06:59 PM.
#9
SHADOW HUNTER ALPHA
-
- Members
- 1,116 posts
Member
Posted 06 August 2007 - 06:51 PM
This won't do what you think it will. As mentioned before, drying the foam in a dryer only straightens it (in short lengths). The foam does not change noticeably in any other way, and it will be a waste of time and electricity to try. (Also, you would melt the foam before you melted the rubber, so there's no point in doing anything to the stock head.)When making stefans, part of the process is to put the FBR pieces into the dryer to harden them. Will it help if I do that stock Micro Darts?
P.S. I searched and checked the stickies in both the Homemade forums and the Modifications forums and couldn't find anything about this, so don't flame about that.
The only commonly shared fate among us all is death. I turn to the shadows so that I may not be unfamiliar with hell's corridors when I arrive. - SHADOW HUNTER ALPHA
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#10
blister
-
- Members
- 207 posts
Member
Posted 06 August 2007 - 08:16 PM
Putting it in the dryer will fatten the foam.
Subvert the Dominant Paradigm.
#11
Alex Bock
-
- Members
- 29 posts
Member
Posted 06 August 2007 - 11:22 PM
Putting it in the dryer will fatten the foam.
No, as has been said in multiple posts on this very topic already, it just straightens FBR when making darts at home. [No fattening] I also have two dryers, a very crapy one that is never used and one that is acually used. I put a stock suction dart in a pillow case, tied the case with rope, then put the dart in for 10 minutes on medium heat. I opened the dryer to an erid smell of melted rubber. [yummy...] It was just nasty.. I wouldn't recommend trying this if you have a favorite pillow case and a lack of Oust cans...
Ha
[-> alex <-]
P.S. I don't know what happened with the foam of the dart because it was covered in melted rubber thus I didn't really want to touch it. I looked as straight as before, don't know about the hardness but it shouldn't have changed.
Edited by Alex Bock, 06 August 2007 - 11:22 PM.
#12
stewy
-
- Members
- 17 posts
Member
Posted 07 August 2007 - 09:05 AM
Well, actually when I put my stock micros and taggers they didn't appear thicker, but they definitely fit in the barrels better.
I say put a whole bunch in the drier and see what happens-it's not like something bad will happen anyway.
I say put a whole bunch in the drier and see what happens-it's not like something bad will happen anyway.
#13
Alex Bock
-
- Members
- 29 posts
Member
Posted 07 August 2007 - 04:08 PM
mmm... melted rubber =D
[-> alex <-]
[-> alex <-]
#14
NirvanaScorpion
-
- Members
- 120 posts
Member
Posted 07 August 2007 - 08:05 PM
I wouldnt do this...I know people have said this...but if you wanna do it sure, Id say just heat it with obvious stuff.
"If rock n rolls illegal throw my a** in jail" - Kurt Cobain
Guitar Heroes-Jimmy Paige, Eric Clapton, Jimi Hendrix, Kurt Cobain
Newly Found(thanks General)-Yngwie Malmstein, this guy is an accoustic expert.
Guitar Heroes-Jimmy Paige, Eric Clapton, Jimi Hendrix, Kurt Cobain
Newly Found(thanks General)-Yngwie Malmstein, this guy is an accoustic expert.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
