85 replies to this topic

[Toad]

Holy fing shit.
I've seen you do some nice stuff... but that there... That takes teh cake.

Edited by Toad, 29 July 2007 - 09:34 PM.

[Texansharpshooter]

That's ridiculous. Like another person said, I'm gonna hate staring that thing down at Apoc. Just one question: Did you put a counter-weight on the right gun to keep it from keeling over to the left while firing with one hand? Loving the paintjob also.

[funkyjake]

Good. Lord.
Hell yes for hookah and Unearth.

[zaphodB]

Congrats on making the most bullet packing "single" gun
Since your mod will completely overshadow every other thread for the next few weeks, I'll post my secret project mod later...

you couldn't wait 1 more day could you? Just had to blow us all out of the waters didn't you...

Edit: HOLY!! Is that a row of Longshot scopes in the left?

no.

I believe that's a row of longshots in the left.

[Springer]

Wow forsaken. WOW. Your mods have never failed to impress me but this is just the pure essence of awesome. AWESOME!!!

[vulcapyro]

Wow. WOW. IN. SANE.
The only downside would be that you'd have to track all the bullets down, unless you had a belt of 'em or a clip. =O

[Retiate]

Wow. That thing's wicked.
Looks like you got an upgrade from your usual RF20 in Assassins. And it's a lot scarier, especially with the flashing red lights blinking in front of your face. I think it's gonna be a "see those red lights and you're gone" kind of thing.
How many shots can each get off before running out of pressure? Some kind of speedloader or extra clips would be crazy if you can get off 2 full turrets.

[JurassicPark]

Perfect, just perfect. You sir are a god of mods.

[General Cole]

Hey angel, these guys got a point. Get with capn slug and see if you can get an RF20 turret for 3D printing.

[taita cakes]

Thats fuckin Effeminate.

[joeyaglr444]

ALL HAIL THE FORSAKEN ONE!

THat is the most sexiest gun ever....thats terminator 2 and predator put together,
My friend well done Someone should give you a dollar.

[King Of Butt Land]

Daaayummmm. tH@7$ 73h h077n3$$.

-Butt

[Rambo]

Wicked shweet. Again, a great mod, but form you, what else is new...

It's gonna suck staring down the barrel of this at Apoc...

That's ridiculous. Like another person said, I'm gonna hate staring that thing down at Apoc. Just one question: Did you put a counter-weight on the right gun to keep it from keeling over to the left while firing with one hand? Loving the paintjob also.

I find it mildly humorous that the lyrics on the video from the song, "The Devil Has Risen" say:
"We will stare down the eyes of fire."

Edited by RAMBO, 30 July 2007 - 09:59 AM.

[joeyaglr444]

I think this is the MOST innovative idea in the nerf underground Congratulations...they should definatly mass produce this one.

[CAP Blue Beret]

That is insane! Nice job. Love the mask!

[SHADOW HUNTER ALPHA]

This kicks ass. It's the kind of thing that makes you want to fabricate another one, mirror-imaged for your other hand, and unleash on unsuspecting targets just for fun. Not that that would be practical to reload, but who thinks about practicality when they're feeding off the ecstasy of using a gun that can mow down anything nearby?

[AODL]

Forsaken, this is sickness beyond words. Why the Hell are you so good at this?! Your's are by far the best mods I've ever seen. You are a modding GOD!!!

[KBarker]

Absolutely incredible. I think to take full advantage of HPA, however, you should add drop-and-swap turrets. The slowest part of reloading an RF20 is always shoving all the darts into the barrels. Thanks for mentioning my spacers on that beast!

[Dangaard]

I love the the way it functions, and the way it looks is fantastic, but I am curious, why did you descided on a side by side configuration of the two rf20's? I suspect it was for the "eye's" effect but functionally how do you think it would perform as compared to an over-under configuration?

[The Shadow]

For some odd reason I have a sense that someone is going to get mauled with darts at APOC unexpetedly. And I'm going to be there to laugh at them.

Edited by The Shadow, 31 July 2007 - 02:03 PM.

[Maeric]

While I'm not going to do the hero-worship thing, i will just say this: OMFG! (as he passes out at his computer)

Awesome job man.

[Forsaken angel24]

[quote name='baseballnolan5' date='Jul 29 2007, 06:29 PM' post='117539']
Looks good but you should figure out how to get those lights to blink for the whole time. How heavy is it and what did you cover the holes with? Also what in the world is that guy holding that you shoot at?
[/quote]

Why would I want the lights to flash for the whole time? The batteries would die out so quickly. Not heavy at all. I covered the holes with plastic sheeting found at the hardware store. I think it is Plexiglas.

[quote name='frost vectron' date='Jul 29 2007, 06:51 PM' post='117542']
That is an incredible piece of work, angel.

I now understand the deeper meaning to this:

[quote name='Forsaken_angel24' post='117200' date='Jul 25 2007, 10:25 PM']
This thread is hilarious.
[/quote]

Hehehe. How many shots before you have to refill that 3000 psi tank? The blinking red lights in combination with the clear PETG and spacers create a beautiful effect.

I don't have an RF20, but how do they compare to Wildfires? Do you think a barrel replacement on a Wildfire would be as effective as on the RF20?

I would have never imagined your ultimate project would be so... ultimate!
[/quote]

Thanks, it always means something coming from a vet. I think I can get off 1000 shots before refilling the tank.
The RF20 is superior to the WF in every way except the WF is louder and has a strap. I think a barrel mod on a WF would bring ranges 5-10 feet less than a RF20.

[quote name='frost vectron' date='Jul 29 2007, 07:20 PM' post='117546']
Oh yeah... Angel, I just noticed that you have a lot of scary stuff in your house! That clown is the embodiment of evil, I swear.
[/quote]

Yeah I love Evil and Halloween and all that jazz. I throw a wicked Halloween party every year. I put about 18 hours into decorating my house and about $250 budget every single year for decor and such.


[quote name='shadowkid33' date='Jul 29 2007, 08:06 PM' post='117553']
It's gonna suck staring down the barrel of this at Apoc...
[/quote]

I dont know if I am going to bring this to APOC.

[quote name='RAMBO' date='Jul 29 2007, 08:23 PM' post='117556']
Longest mod post ever?

Would there be any reason not to cut off the red bit on the back of the second one? It kind of looked like you were holding it in one of the scenes in the vid, but it wouldn't hurt it to take it off, right?
[/quote]

I guess I broke a new record that way too.

I didn't cut off the extra bit because I like to keep screw ports around the edges of all my guns no matter how minimized they are.

[quote name='nerfer34' date='Jul 29 2007, 08:37 PM' post='117557']
Sweet, if only you could clip mod them........

Those lights look really cool too.

Just an amazing mod. It looks like you took a slightly more simple approach than CS.
[/quote]


The turrets are loose when they are outside of the shell. They would fall apart because the metal bar just goes in the turret. There is nothing holding it in there any more. It is possible to turret mod this beast but you cannot do it with lights.

[quote name='Spectre666' date='Jul 29 2007, 09:56 PM' post='117569']
B. if it was bossible to integrate four together.
[/quote]

It is possible but it would be a huge waste of air and the reload time would be ridiculous.

[quote name='Oro?' date='Jul 29 2007, 10:20 PM' post='117575']
RAMBO- It's not exactly in "sync" because I noticed the gun on the left stops firing a little while after the right one does.

Forsaken- Damn, I wish I could mod nerf guns as successfuly as you can. That thing really is a devil.
[/quote]

This is true the right turret fires about 15% faster than the other turret. This has something to do with how much air pressure is required to move the piston. I think the left one is a bit tougher/stronger. This is the exact reason why I was worried to do a piston mod.

[quote name='Texansharpshooter' date='Jul 29 2007, 10:36 PM' post='117578']
Did you put a counter-weight on the right gun to keep it from keeling over to the left while firing with one hand? Loving the paintjob also.
[/quote]

No and thank you.

[quote name='Retiate' date='Jul 29 2007, 11:18 PM' post='117586']
Wow. That thing's wicked.
Looks like you got an upgrade from your usual RF20 in Assassins. And it's a lot scarier, especially with the flashing red lights blinking in front of your face. I think it's gonna be a "see those red lights and you're gone" kind of thing.
How many shots can each get off before running out of pressure? Some kind of speedloader or extra clips would be crazy if you can get off 2 full turrets.
[/quote]

I cannot wait to mow someone down with this thing in Assassins. That is the main reason I made this gun. The lights are very bright. It's like if you were to see them in the dark you would be temporarily partially blinded. Like a lighter does of a camera flash but X4 and red. It will stop them in their tracks. If the lights don't stop them it will mess their vision a bit. I am also hoping the red lights will light the target up enough in the night to have the camera pick it up.

[quote name='General Cole' date='Jul 29 2007, 11:42 PM' post='117589']
Hey angel, these guys got a point. Get with capn slug and see if you can get an RF20 turret for 3D printing.
[/quote]

That sounds way above my head, I love the idea but 3d printing scares the shit out of me. Homemade turrets,clips and mags scare me because they would have to work perfectly with the stock guns motions and such.

[quote name='RAMBO' date='Jul 30 2007, 10:56 AM' post='117607']

I find it mildly humorous that the lyrics on the video from the song, "The Devil Has Risen" say:
"We will stare down the eyes of fire."
[/quote]

I timed that and a few other things in the video. That song was really inspiring to get me to finish the project.


[quote name='KBarker' date='Jul 30 2007, 03:59 PM' post='117644']
Absolutely incredible. I think to take full advantage of HPA, however, you should add drop-and-swap turrets. The slowest part of reloading an RF20 is always shoving all the darts into the barrels. Thanks for mentioning my spacers on that beast!
[/quote]

Drop and swap clips would be sweet. I might be ordering some more spacer plates from you soon.


[quote name='Dangaard' date='Jul 30 2007, 07:19 PM' post='117666']
I love the the way it functions, and the way it looks is fantastic, but I am curious, why did you descided on a side by side configuration of the two rf20's? I suspect it was for the "eye's" effect but functionally how do you think it would perform as compared to an over-under configuration?
[/quote]


Over under would still be aiming in the same area and what is the point of that? With two turrets side by side you get more spray and a wider kill zone.


Here is some more eye candy.





Badger's sspb in the background.






This last one is still my favorite photo.


For some reason the quotes aren't working for me. I don't know whats wrong. Any other questions?

Edited by Forsaken_angel24, 31 July 2007 - 10:10 PM.

[General Cole]

Wouldn't it be possible to just make lots of the spacer plates and barrel set ups and then permantly attach the PTEG to the plate and make like lots of couplers? Maybe use two spacer plates? What would be the odds of chaining this beast? I also noticed that you missed a spot on the right gun when holding near the forwarding piston (the triangular piece).

[LastManAlive]

Holy sheep-did batman, I just shat my underbritches.



Once again, a very nice, yet not nice in the pants region, production by you.

[SHADOW HUNTER ALPHA]

Wouldn't it be possible to just make lots of the spacer plates and barrel set ups and then permantly attach the PTEG to the plate and make like lots of couplers?

It would be a better reload time, but also be hell to line the barrels all up while being shot at by the few who survived the barrage. It might also be difficult to carry so many reloads. Plus, there is very little space between the barrels for any kind of coupler system, and it's not going to be worth it to Dremel down 40 couplers that would have to fit the PETG so that they are housed correctly. That's my thought, and Angel's probably going to agree.