10 replies to this topic

[Uterly]

not much of a performance mod but this drastically cuts down the size of the titan. I simply used the back end of a ball blaster to house the tank and added an extra RF 20 pump.




(it isn't screwed together in the picture but when it is it is seamless)


Inside needed a little drilling and I had to drill 2 holes for the pump and trigger pull

It is fired using the pull ring on the back but if anyone can find a way to integrate a trigger that would be sweet.

Edit: I also don't know where to attach the pump...ideas....?

Edited by Uterly, 20 July 2007 - 05:17 PM.

[Scotch]

Not bad for an Integration of 3 guns. Maybe you could spraypaint it if you want. I really like this because i can never run with my Titan in a war.

Not bad at all.

Do you know if it decreases the rof or ranges?

Thanks

Edited by Scotch, 20 July 2007 - 05:15 PM.

[telekinetic]

Not bad for an Integration of 3 guns. Maybe you could spraypaint it if you want. I really like this because i can never run with my Titan in a war.

Not bad at all.

Do you know if it decreases the rof or ranges?

Thanks

It decreases ROF by having a smaller pump volume.

Range isn't affected.

[Uterly]

Do you know if it decreases the rof or ranges?

Thanks

I had to used a RF 20 pump since my titan pump broke but as long as the air chamber is filled to the top it is just like a normal titan...but without the 2 feet of excess plastic

[keef]

I have to make this!
How much room is still left in the Pulsator's shell?
Maybe you could add something like a barrel attachment holder or something ?

[Uterly]

I have to make this!
How much room is still left in the Pulsator's shell?
Maybe you could add something like a barrel attachment holder or something ?

it pretty much fills the shell. there might be a little less than an inch in the back but the trigger pin for the titan tank runs through there

also, where would i fit a barrel attachment holder... the whole point in me making this was to minimize size

[keef]

Dark- Who cares its a ball blaster

Uterly- I don't know, something like this Sorry for the shitty picture, but I'm leaving for the shore soon.

[derbaron]

Dark- Who cares its a ball blaster

Yes they're both ball blasters, but the pulsator is a lot different than the one Uterly used.

Pulsator
Reactor(the gun shell Uterly used)


You might be able to epoxy something like a coat hanger to the pull rod from the airtank and run it up to where a trigger would be, then either take the trigger from another gun or fashion one yourself. It would look something like this crappy paint drawing:

[Quilan Fett]

You might be able to epoxy something like a coat hanger to the pull rod from the airtank and run it up to where a trigger would be, then either take the trigger from another gun or fashion one yourself. It would look something like this crappy paint drawing

Like this

[derbaron]

You might be able to epoxy something like a coat hanger to the pull rod from the airtank and run it up to where a trigger would be, then either take the trigger from another gun or fashion one yourself. It would look something like this crappy paint drawing

Like this

Yes, but ideally most of it would be inside the case. I don't know how much more room he has though, hopefully your picture will help inspire him.