
Well when I got my EaB a few weeks back I loved it. Scope and all. Next I looked at my emergency supplies bucket of pipe and knives to mod on the road and looked at my measly pieces of pipe. I opened her up and saw this.

The first step is simple, open it up and take out all the parts that arent the plunger or rod or trigger.
The second step is to find the old barrel and its extension spring. After finding those find this part-

Now seal up any holes you might find in the barrel, and wrap a few layers of E-Tape around the "O-Ring" and we are ready for reassembly. Insert the extension spring after streaching it a bit. Then instert the extension barrel in its proper layout. Next and the piece in the 3rd pic into its place. Close it up and push the barrel back. You will have no need to reextend it.
Tight Dart (Had to Ramrod)- 52'
Medium Dart (Blew in but it was still hard)- 61'
Loose Dart (Blew Back)- 85', 94' (I think the wind caught it a bit), 89', 81'
And that is with no banding and no long barrel and no extra spring. I think all of you guy's EaBs were lemons. And I added some ammo holders to the stock. And I have no pics of my gun at the time or for a while.
Credit to CXWQ for first 2 pics.
Edited by General Cole, 24 July 2007 - 12:58 AM.








