Jump to content


Photo

Eab Mod

Uno Mas

7 replies to this topic

#1 General Cole

General Cole

    Member

  • Banned
  • 868 posts

Posted 20 July 2007 - 03:59 PM

Posted Image

Well when I got my EaB a few weeks back I loved it. Scope and all. Next I looked at my emergency supplies bucket of pipe and knives to mod on the road and looked at my measly pieces of pipe. I opened her up and saw this.

Posted Image

The first step is simple, open it up and take out all the parts that arent the plunger or rod or trigger.
The second step is to find the old barrel and its extension spring. After finding those find this part-

Posted Image

Now seal up any holes you might find in the barrel, and wrap a few layers of E-Tape around the "O-Ring" and we are ready for reassembly. Insert the extension spring after streaching it a bit. Then instert the extension barrel in its proper layout. Next and the piece in the 3rd pic into its place. Close it up and push the barrel back. You will have no need to reextend it.

Tight Dart (Had to Ramrod)- 52'
Medium Dart (Blew in but it was still hard)- 61'
Loose Dart (Blew Back)- 85', 94' (I think the wind caught it a bit), 89', 81'

And that is with no banding and no long barrel and no extra spring. I think all of you guy's EaBs were lemons. And I added some ammo holders to the stock. And I have no pics of my gun at the time or for a while.

Credit to CXWQ for first 2 pics.

Edited by General Cole, 24 July 2007 - 12:58 AM.

We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34

You know what... I know it's kinda late... but Props Cole.
-Baghead

#2 TED

TED

    In Brightest Prawn, in Darkest Shrimp...

  • Administrators
  • 1,339 posts

Posted 21 July 2007 - 11:05 PM

Awesome write-up oh wait it sucked. If you were using a 4.5 in barrel how do you load darts? I would think that the barrel wouldn't even stick out of the gun. Also what was the point of posting those two pictures? Does the stock internals of the gun some how help people perform your mod. Also I think that your ranges are bullshit.
  • 0
Star Wars can go fuck itself.

#3 General Cole

General Cole

    Member

  • Banned
  • 868 posts

Posted 21 July 2007 - 11:07 PM

I have no reason to BS. And I am about to edit the first post with pics of my gun and then you can see what I mean.
We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34

You know what... I know it's kinda late... but Props Cole.
-Baghead

#4 Thom

Thom

    Member

  • Members
  • 759 posts

Posted 22 July 2007 - 12:18 AM

Level or angled ranges?
  • 0

#5 CAP Blue Beret

CAP Blue Beret

    Member

  • Members
  • 72 posts

Posted 22 July 2007 - 10:33 AM

Question: Did you get this at a garage sale, or is there some store that has these? I know that target has the BBB as an exclusive, and Toys R Us has it as the N-strike rocket system. I've been looking for one of these for a while, but don't want to get it off of E-Bay.

And everyone, if he thinks its a good mod for him, let him post. Even if you think that it is a waste of time to do it. He is happy with it, so it has served its purpose. You don't have to do the mod.
  • 0
Check out NerfNation

#6 General Cole

General Cole

    Member

  • Banned
  • 868 posts

Posted 22 July 2007 - 11:36 AM

No, I got it from wldworld. Ranges are how I normally fire, with no more than a 10 degree rise on them.
We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34

You know what... I know it's kinda late... but Props Cole.
-Baghead

#7 General Cole

General Cole

    Member

  • Banned
  • 868 posts

Posted 23 July 2007 - 01:47 AM

EDIT- I made it into a more suitable write-up thats actually detailed.
We should stop calling out/making fun of/pissing GC off. He's actually contributed and is available for trade. He's a better than average member no doubt. Got your back Cole.
-Nerfer34

You know what... I know it's kinda late... but Props Cole.
-Baghead

#8 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,821 posts

Posted 23 July 2007 - 10:28 PM

You should give credit to cx for the first two pictures.
  • 0
SexD Warves


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users