Jump to content


Photo

Working On An Ls At2k Integration

I would apreciate any some advice.

11 replies to this topic

#1 Dangaard

Dangaard

    Member

  • Members
  • 134 posts

Posted 18 July 2007 - 07:07 PM

My plan is to keep the LS bolt/clip parts, but I want to add an at2k like this

Posted Image

my plan is to epoxy a lexan sheet ontop of the trigger in order to do so it will have to be placed back far enough not to interfere with the bolt asembly.
Posted Image

I will then Attach a bit of steel cable (braded) to the lexan plate and the at2k firing pin. the wire will have enough slack so that the at2k cannot be fired untill it is in the forward position.


I am going to have to grind down some of the inner walls to make room for the lexan.

Posted Image

I have circled the inner walls I will have to grind down

Posted Image

So, any advice you would like to give?

Edited by Dangaard, 18 July 2007 - 07:12 PM.

  • 0
Discretion is the better part of valor, thats why I carry a very big axe.

You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.

What have I got in my pocket? (tolkien)




#2 nerfer909

nerfer909

    Member

  • Banned
  • 141 posts

Posted 18 July 2007 - 07:34 PM

I would just say go for it, it sounds like it would work.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.


Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.

#3 chalywong

chalywong

    Member

  • Members
  • 130 posts

Posted 18 July 2007 - 07:54 PM

Where is the pump going to go?
  • 0

#4 Dangaard

Dangaard

    Member

  • Members
  • 134 posts

Posted 18 July 2007 - 08:00 PM

On the outside, if you were holding the gun in your right hand it would be on the left side.
  • 0
Discretion is the better part of valor, thats why I carry a very big axe.

You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.

What have I got in my pocket? (tolkien)




#5 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 19 July 2007 - 06:34 AM

It`s cool and all, but alot of the vets around here, ask why as it lowers your ROF. Perhaps there is something else here that you are trying to accomplish here...
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#6 Dangaard

Dangaard

    Member

  • Members
  • 134 posts

Posted 19 July 2007 - 07:02 AM

Yeah, it lowers overall Rof, but I removed the dart tooth before I knew what I was doing. I replaced the at2k pump with a larger pump to now its only 1-2 pumps for power. I hope to increase my ranges without having to somehow manufacture a breech.

Edited by Dangaard, 19 July 2007 - 09:20 AM.

  • 0
Discretion is the better part of valor, thats why I carry a very big axe.

You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.

What have I got in my pocket? (tolkien)




#7 Prometheus

Prometheus

    Member

  • Members
  • 780 posts

Posted 19 July 2007 - 07:25 AM

You`ll need to replace the barrel to get better ranges. More power and a shitty barrel will do little. Also, a better barrel will really increase accuracy, as well as effective utilization of air.
  • 0
QUOTE(VACC @ Jan 24 2008, 06:12 AM) View Post
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously

#8 Dangaard

Dangaard

    Member

  • Members
  • 134 posts

Posted 19 July 2007 - 08:56 AM

I believe I neglected to mention and it's not in the pics but I did replace the barrel with a loose copper barrel, but its not to loose. The rebarreling is why I replaced the dart tooth mechanism. ah the irony.
  • 0
Discretion is the better part of valor, thats why I carry a very big axe.

You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.

What have I got in my pocket? (tolkien)




#9 monkey with a nf

monkey with a nf

    Member

  • Members
  • 110 posts

Posted 19 July 2007 - 09:11 AM

It looks like you have the AT2K tank resting on the bolt carrier, which would be a good way to keep it sealed, but I'm wondering how that will work with the trigger.
  • 0
QUOTE(Pineapple @ Sep 12 2007, 03:13 PM) View Post

For maximum efficiency?


1. Pump up. Count how many pumps.

2. Keep going until you hear a loud "bang".

3. Subtract one pump from the total. Rebuild your air bladder.


There you go.

#10 Quilan Fett

Quilan Fett

    Member

  • Members
  • 678 posts

Posted 19 July 2007 - 10:33 AM

You should make it so it pumps as tou pull the bolt like the LS/AT3K.
  • 0
SNAP Shotgun


This guy can see the future!

QUOTE(pokemaster @ Mar 3 2009, 04:18 PM) View Post

hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns

#11 Dangaard

Dangaard

    Member

  • Members
  • 134 posts

Posted 19 July 2007 - 04:53 PM

Qui'lan, I have thought about it but I descided not to, mabey after I find a small pump that fills the at2k in one pump with a stroke 5" long, not likely.
  • 0
Discretion is the better part of valor, thats why I carry a very big axe.

You can fool some people all of the time and everyone some of the time, but you cant fool all the people all of the time, but it sure is fun trying.

What have I got in my pocket? (tolkien)




#12 blister

blister

    Member

  • Members
  • 207 posts

Posted 19 July 2007 - 07:55 PM

You could always make a pump.
  • 0
Subvert the Dominant Paradigm.


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users