Jump to content


Photo

Need Help With Maverick Swinning Barrel Mod


8 replies to this topic

#1 wantwasabi

wantwasabi

    Member

  • Members
  • 3 posts

Posted 18 July 2007 - 01:46 AM

i just read a mod on how to make the barrel on a mav swing out farther. i looked at the picture to see what to cut off but the peg in the middle is restricting me to take it out. how do i get those pieces out. thanks in advanced.
  • 0

#2 Spectre666

Spectre666

    Member

  • Members
  • 229 posts
  • Location:Evanston, IL, USA

Posted 18 July 2007 - 01:58 AM

Basically, you take your gun apart, and get the part with the chamber and the two pegs, and you grab the sharpest knife you can find, and you cut away anthing that you can figure as an obstruction. If you still don't understand, I'll post pictures later.
  • 0


Just because you can't see me doesn't mean I'm not there.


"Quoth the Raven,'Nevermore.'" - Edgar Allan Poe

#3 wantwasabi

wantwasabi

    Member

  • Members
  • 3 posts

Posted 18 July 2007 - 02:01 AM

if i do take the peg out wont that make the barrel fall apart when i assemble it again?
  • 0

#4 Spectre666

Spectre666

    Member

  • Members
  • 229 posts
  • Location:Evanston, IL, USA

Posted 18 July 2007 - 02:45 AM

NO!NO!NO! I didn't mean those little pegs. Um. just Wait until I get home from summer school today, I'll give you pictures of what you need to do. Until then, don't do anything, unless someone else tells you what to do first.

Where do you live? I need to do proper time-zoning.

Edited by Spectre666, 18 July 2007 - 02:46 AM.

  • 0


Just because you can't see me doesn't mean I'm not there.


"Quoth the Raven,'Nevermore.'" - Edgar Allan Poe

#5 wantwasabi

wantwasabi

    Member

  • Members
  • 3 posts

Posted 18 July 2007 - 02:49 AM

wooo! thanks for your help haha. i live in california, pacific standard time.
  • 0

#6 Spectre666

Spectre666

    Member

  • Members
  • 229 posts
  • Location:Evanston, IL, USA

Posted 18 July 2007 - 01:33 PM

I'm back. Here's what you need to do:

At the front of the chamber, the chamber-holder, for lack of a better word, has a little peg. No, on the top of it. Take your knife, and cut that peg off. This is what I'm talking about (use picture and compare to your own. Sorry, I only have pictures of after.)
Posted Image

Posted Image

Now, turn to the back. You have to cut off this obstructing nib of plastic, see below:

Posted Image

Again, compare yours to mine if you still can't figure it out.

Hope this helped.

Edited by Spectre666, 18 July 2007 - 01:34 PM.

  • 0


Just because you can't see me doesn't mean I'm not there.


"Quoth the Raven,'Nevermore.'" - Edgar Allan Poe

#7 watkins

watkins

    Member

  • Members
  • 68 posts
  • Location:North Andover MA / Gettysburg PA

Posted 18 July 2007 - 02:58 PM

You actually dont need to make the cuts in the last picture. Instead of two cuts, just cut the single piece in the way off of the shell.
  • 0

#8 bjack

bjack

    Member

  • Members
  • 39 posts
  • Location:Long Island, NY

Posted 18 July 2007 - 05:00 PM

If you can use a dremel because i tried to do this at first with a knife and gashed myself pretty bad.
  • 0

#9 frost vectron

frost vectron

    Member

  • Members
  • 526 posts
  • Location:Berkeley, CA

Posted 18 July 2007 - 07:40 PM

The plastic is soft enough for you to file down. It won't take but a minute.
  • 0
Latest Modification: The Professional

"I am a leaf on the wind--watch how I soar" - Hoban "Wash" Washburne, Serenity.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users