Edited by nerfer909, 19 July 2007 - 02:57 PM.
My Magstrike 20 Round Clip + Video
thanks captain slug.
Started by
nerfer909
, Jul 17 2007 09:47 PM
9 replies to this topic
#1
Posted 17 July 2007 - 09:47 PM
here she is, it is 20 inches of 2 inch pvc, with 2 endcaps, one with vinyl tubing gooped into a drilled hole and conected to the magstrikes valve, and the other one drilled out and has a shrader valve gooped in, everything at the bottom is cut away, and the endcaps a pvc cemented to the pipe to keep it on better. Bungees ans a strap for my back.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#2
Posted 17 July 2007 - 09:53 PM
Excellent job man! i really with i had the tools and the skills to do that. Was the clip very hard to make?
#3
Posted 17 July 2007 - 09:56 PM
Very nice mod . It makes me want to run out and buy a magstrike right now.
Just because you can't see me doesn't mean I'm not there.
"Quoth the Raven,'Nevermore.'" - Edgar Allan Poe
#4
Posted 17 July 2007 - 10:16 PM
No not if you have a dremel.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#5
Posted 17 July 2007 - 10:44 PM
How many pumps can that tank hold?
I guess you have some heavy duty industrial strength toilet paper holders. Do they advise you to wear eye protection when changing rolls?
My TTG mod.
#6
Posted 17 July 2007 - 10:50 PM
Can you show how to fuse the two clips?
Just because you can't see me doesn't mean I'm not there.
"Quoth the Raven,'Nevermore.'" - Edgar Allan Poe
#7
Posted 17 July 2007 - 11:01 PM
go to the modifications directory and look under magstrike and you will see magstrike 20 round clip, it will show you better than I can expain, thats where I saw how to. it holds about up to 50 psi or so, abou1 10-20 pumps on a step on bike pump.
Edited by nerfer909, 17 July 2007 - 11:02 PM.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#8
Posted 19 July 2007 - 11:16 AM
Sorry for the double post but to fuse the clips together, I used a dremel, you cut it like this, cut the top completely off one clip, and dremel around the outside but where the advancing peices are leave exactly 1\2 inch between them and cut around the top and bottom of the clips so it just looks like on extra long clip, cut it so that the barrels are all next to each other, like this:
Hope this helps.
Hope this helps.
QUOTE
Step 1: Throw TTG against wall.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#9
Posted 20 July 2007 - 08:14 AM
Wow. My impression was that it would take a scrollsaw to get the required precision to get the clip to work, but I guess not. Do you have instant tube fittings on the magstrike, or is the tubing just gooped in? Also, what are the ranges?
For maximum efficiency?
1. Pump up. Count how many pumps.
2. Keep going until you hear a loud "bang".
3. Subtract one pump from the total. Rebuild your air bladder.
There you go.
#10 Guest_yourface_*
Posted 20 July 2007 - 04:00 PM
Wow, nice. You've gone a long way from nickels and hot glue. What are the ranges?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users