7 replies to this topic

[raw shrimp]

I recently purchased a lonshot and whenever i use it, the stock goes back from being in the extended form.

I was just wondering if this happens to any one else, and if there was any way to fix it.

[Evil]

I don't know much about LongShots, but I would suggest that you lock the stock in place using the bottom on the side of the stock... How old are you, new [raw] Shrimp?

[raw shrimp]

I don't know much about LongShots, but I would suggest that you lock the stock in place using the bottom on the side of the stock... How old are you, new [raw] Shrimp?

Im 14. I just joined a little while ago.

But even with the stock button is in lock, after you shoot about a clip, it goes back into the default mode.

[watkins]

How do you stop anything from moving in any situation? You block it. Either glue it extended, or put something in the way so it cant collapse. I took some scrap plastic and cut it to the size of the track along the bottom of the body that keeps the stock extended but can be removed if I want to close it. Other people have used pieces of PVC in the stock itself as a permanent fix.

[Thom]

Angel's Mod has a picture of his stock blocked with PVC.

[Flaming Hilt]

Angel's Mod has a picture of his stock blocked with PVC.

Aye. That seems to be the general solution going around.

[BustaNinja]

I had the same problem after I dropped it on the stock. just take it apart and pop the little stock lock out. (in the locked position, the little nob should come out about 1/4 inch) hope thaty helps.

[Prometheus]

I used the same method as FA_24, and highly recommend it. I also made mine somewhat removable, so I can collapse the stock if need be.