I cant get the trigger to work any suggestions for a new one that will fit in the housing(there is 3/4" of clearance but its rounded). I don't know if this is really possible. HERE is a link to Bolt's plans for it. Thanks.
Question For Boltsniper's Gns
I cant get the trigger to work...
Started by El-Cheapo, Jul 10 2007 05:37 PM
4 replies to this topic
#2
Flaming Hilt
-
- Members
- 1,070 posts
Member
Posted 10 July 2007 - 07:19 PM
Try le clothespin trigger. Never failed me as long as a thick enough nail was used.
" Beneath this mask there is more than flesh, Mr. Creedy. Beneath this mask there is an idea...
...and ideas are bulletproof. "
...and ideas are bulletproof. "
V
#3
El-Cheapo
-
- Members
- 20 posts
Member
Posted 11 July 2007 - 02:09 PM
the thing is that the area where you can put the nail through is to far back to work with the closepin, but maybe if I made some string come from the closepin to the trigger it would work but it would be tough to integrate a pivoting trigger. Look at this picture, see how it wouldn't work well.Try le clothespin trigger. Never failed me as long as a thick enough nail was used.
#4
Prometheus
-
- Members
- 780 posts
Member
Posted 11 July 2007 - 07:22 PM
Make the gun into a SNAP with the funky cut PVC on the bottom of the receiver.
QUOTE(VACC @ Jan 24 2008, 06:12 AM) 
I am NEVER going to sleep naked in the bed of a former child star ever again....seriously
#5
Carbon
-
- Moderators
- 1,894 posts
Contriberator
Posted 15 July 2007 - 12:39 AM
My question would be more along the lines of, what about the original trigger isn't working? Does it not catch? Not let go? What is it (or is it not) doing? That, and do you have any pictures of what you've done?
Hello. I am Indigo of the Rainbow Clan. You Nerfed my father. Prepare to die.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
