4 replies to this topic

[nerfer75]

I modded a regular SM500 for my friend a few months ago.

Basically, I used a hacksaw and cut off the barrel. First I cut up to the fake "flash hider."

I looked down the barrel to see that the air restrictor was even further down. Annoyed, I used the hacksaw and cut even further down the barrel. I kept going until I finally got rid of all the AR crap. I then put a 3/4" to 1/2" CPVC reducer straight onto what was left of the barrel. I epoxied that in place, then slapped a short 1/2" CPVC barrel in the reducer (a reducer is like a coupler except one side is one size and the other side is another size).

This is the only photo I have available, sorry for the lack of step-by-step instructions and such. Enjoy.

The gun in the top left is called R.A.W. Force. Does anyone know anything about this gun? Have one? Or know where I can get one?

[SHADOW HUNTER ALPHA]

From what I found, it is out of production and rare, and your best bet at obtaining one would be from other users or garage sales of stupid people who don't appreciate the value of such guns.

[frost vectron]

As it is my gun, let me tell you:

It's an air pressure gun, not a cocking. The original stock ammo were large, red, sponge-like balls.

The airtank isn't all that large nowadays with the Titan in production.

The manufacturer is "YES! Entertainment Corp.", full gun name is "RADICAL AIR WEAPONS - The Force", and the copyright on the gun reads "1997".

Currently mine is modded to shoot large slugs made of pipe insulation, getting fairly good ranges for such a large piece of foam. I am working on a mod to shotgun micros, but I have been bogged down with other mods. When I finally get around to it, I'll be sure to document everything and give photos of the internals.

Also, if anybody else knows anything about the gun:
My check valve appears to be broken. My overpressure valve is plugged. When I pump the gun up, the pump handle starts to come back out (air is pushing it out).

[Forsaken angel24]

I was able to find one and gutted it for parts.
Still haven't found a good use for the parts though.

[nerfer75]

Interesting. Thanks for the info guys.