
A Really Stupid Question
#1
Guest_yourface_*
Posted 24 June 2007 - 06:41 PM
#2
Posted 24 June 2007 - 06:43 PM
It varies. Tell us the brand of your FBR and someone may be able to help you. However, I can tell you that most FBR is not 1/2" in diameter, usually a little more.What is the diameter of 1/2" FBR? Is it 1/2"? I'm buying PVC from McMaster, and I need to know. And I have no idea on how to measure the diameter of it, my ruler is too inaccurate.
I broke my clippers trying to cut the spring. So I couldn't break the spring with my bare hands so I used a hammer to pound the clipper handle and one of the clippers broke off.
#3
Posted 24 June 2007 - 06:48 PM
The Barrel ID needed to shoot 1/2" FBR is anywhere from .505" to .545" depending on the foam you're using. I use Dennis brand "Caulksav'r" polyethylene foam rod from mcmaster (part# 93295K33 or 93295K43) and my preferred barrel ID is roughly .53"
Edited by CaptainSlug, 24 June 2007 - 06:58 PM.
#4
Guest_yourface_*
Posted 24 June 2007 - 07:39 PM
#5
Posted 24 June 2007 - 07:46 PM
I haven't heard of K33... how does it fit in your stock barrels?Thanks, Captain Slug. That's the barrel I already found, and K33 is my FBR. Is that a tight fit or a loose fit? I'm looking for a loose fit - it's for an air gun.
I broke my clippers trying to cut the spring. So I couldn't break the spring with my bare hands so I used a hammer to pound the clipper handle and one of the clippers broke off.
#6
Posted 24 June 2007 - 08:15 PM
DarkShrimp is the next Piney.
"Ignorance can be fixed. Stupidity is forever."
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users