I took everything out thats for the clip and made the cut at the original line before the contanment of the spring. The 1/2 PVC fitted kinda roughly though the piece in the front of the gun so I sanded it to make it more smooth. The length is 8 1/2. I glued it and used a technique in which I take the side of the tip of the glue gun and smooth the exeese glue to make it flush. The only problem I face is finding out how to connect the blue lever to the PVC. I cut a piece of the original barrel where the two meet and screwed it down without going through. So it cocks and all I need to do is blow the stephan down the barrel. For those who dont have stephans can still use the velcro darts because the barrel its long enough. Although you need to make it longer than 8 1/2 if you didn't chop the body.
Covered the clip slot
The front without the orange barrel
The screw to the CPVC
The...yeah
I'm proud to say that this deadly gun gets +100 feet...angled but its great for a outdoor war. The reload times are not as good but ok. So what do ya'll think? Note its still the famous AR43.
Distances
Angled- 1) 104 FT
2) 100 FT
3)-102 FT
Leveled-1) 94 FT
2) 98 FT
3) 92 FT
TA DA!
Edited by Shorty, 23 June 2007 - 06:08 PM.