Cut off the front of the stock barrel that the SECRET STRIKE has. I was able to cut off about an inch. Now, take a saw, or something, and cut the plastic stuff the pump is held on with. Cut it the same legth as you cut the barrel. Now, take the copper coupler, and slide into the cut you made. Apply hot glue if you like, to add stability. Now wrap the 4 inch CPVC in about 3/4 ft. of duct-tape. Slide it in the copper, and apply hot glue to keep it in. Now the gun should get about 70' angled, maybe 57' flat. (I haven't measured but I think I'm pretty close.) Enjoy!
