This is a really simple mod for the Big Blast or the Blast bazooka, since there are pretty much the same gun.
Tools needed:
Hack saw/Dremel
Screw driver( optional )
Masking tape ( optional )
Drill (optional )
Ok here we have are Big Blast
It is up to you at this point too open the gun up if you want too, you don't have too for this mod. See this orange thing on the barrel?
This is where you take your Hack saw or Dremel and cut either the orange head off and drill the remaining orange that is left down too a thin layer or just drill it all out, it is up too you. Or you can just saw all the orange thing off but be careful not too cut too far down cause there are too holes on the side of the gun. If you want to just cut the
holes off then you have too open up the gun. Ok now that the orange cap is cut off it should look like this:
I left some of the orange cap on mine but you don't have too. If you didn't cut off the original side holes then you have too put some masking(or any tape you have, I just like masking tape) on the hole's and it should look like this when the tape is on:
Ok now your done! Now you have your self a nice weapon with good ranges.
Ranges are about 65-70 feet leveled at my shoulder and about 100 feet with an angled shot.
I'll post a video up later with some ranges on it.
I know that this isn't the best mod out there for this gun but its ok.
I just noticed that I spelled "simple" wrong in the title. Could fix it for me, please.
Edited by Dayko, 13 June 2007 - 04:46 PM.