here is a picture of the gun:
ya, I know, the hotglue makes it look kind of sloppy but it is effective.
Step 1: hot glue the pressure chamber and the power gauge. glue the chamber on the bottom and the gauge on the side so it is sticking out
Step 2:attach the pump to the side of the gun. Move it foward or backwards depending on your what you prefer.
step 3: add the barrel and barrel stablizers. take a small 3in piece of 9/16 brass tubing and hot glue it on to the chamber. Then take 2 1in pieces of pvc pipe and glue them onto the barrel and the side of the gun for stabillity.
step 4: add the key-ring. simply attach the ring to the firing for easy pulling.
ranges: *note* the maxshot and at2k have already been modded before I combined them.The at2k has a plugged pump and the maxshot I just added a new barrel.
range on at2k-90ft
range on maxshot-80ft
pic of oring and pressure gauge
picture of the whole contraption
picture of trigger
another pic
Edited by chefdave, 07 June 2007 - 10:56 PM.