Minimized Nightfinder Question
#1
Posted 28 May 2007 - 08:52 PM
How did some of you guys close that up? I've seen a lot of pictures of electrical tape over it, but I want something that'll look nice when I've finished painting it up. I tried some plastic from an old UMD case- it wouldn't take to the glue I was using. Any ideas?
Thanks for anything that pops up in here in advance! ^^
Songs come in two tempos: Metal and Ballad.
#3
Posted 28 May 2007 - 08:57 PM
I don't have any Bondo around, would Home Depot stock it? I've got one about ten minutes away.
Songs come in two tempos: Metal and Ballad.
#4
Posted 28 May 2007 - 10:49 PM
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#5
Posted 28 May 2007 - 10:56 PM
#6
Posted 28 May 2007 - 10:56 PM
Try: Autozone, Kragen, or OSH (they have an automotive department for sure).
You can also try getting a paper cup and a good amount of baby powder (talcum) in it. Spray primer in the cup and mix it with a stick until it's a thick paste. Spread it on the gun (works the same as bondo would) and it's easy to shape/sand.
"I am a leaf on the wind--watch how I soar" - Hoban "Wash" Washburne, Serenity.
#7
Posted 28 May 2007 - 11:53 PM
#8
Posted 29 May 2007 - 12:16 AM
The bludgeoned heart shall burst in vain
But not when love be pointed king
And truth shall Thee forever reign
#9
Posted 29 May 2007 - 09:08 AM
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#10
Posted 29 May 2007 - 07:41 PM
#11
Posted 29 May 2007 - 10:26 PM
Nerfboi, the blockish part of the barrel is hot glue. That whole area is hot glue. I just decided to cut the gun less than most people do. I like the added block
The bludgeoned heart shall burst in vain
But not when love be pointed king
And truth shall Thee forever reign
#12
Posted 30 May 2007 - 12:05 AM
Also, was it hard to make that block?
#13
Posted 30 May 2007 - 12:22 AM
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#14
Posted 30 May 2007 - 12:44 AM
EDIT:
Something else I plan on trying some day. Gift cards, empty of course. Theyre a good size for small holes and sturdy, but with some flex. The same thing used to buy the guns can become a part of them.
Edited by watkins, 30 May 2007 - 01:08 AM.
#15
Posted 30 May 2007 - 12:54 AM
It comes in colors surprisingly similar to Nerf Gun plastic - I've got foam matching my Titan, AT2K, EaB, Nitefinders, and BBB. I covered the gap on my NF with some craft foam cut to fit, then hot-glued. (And BBB, and EaB)
I had to remove it to re-open the gun to fix it, though. If this topic's still going when I get around to putting it back on, I'll post a picture.
#16
Posted 30 May 2007 - 07:32 PM
#17
Posted 30 May 2007 - 07:47 PM
The bludgeoned heart shall burst in vain
But not when love be pointed king
And truth shall Thee forever reign
#18
Posted 30 May 2007 - 11:36 PM
Also my Big Bad Bow and Expand-a-blast, if you're interested.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users