7 replies to this topic

[Flapper12]

Well I was almost done modding it when I noticed my pvc barrels won't fit. The only thing I could think of was singling it so I searched and nothing showed up on the search "Singled at3k" and just "at3k". If someone has a link or something to a singled at3k mod I would really appreciate it.

Edited by Flapper12, 28 May 2007 - 08:32 PM.

[butleriscool123]

Don't give up just yet, try super gluing the pvc to the turret, and if that fails just glue your pvc to the air tank, its pretty easy.

[Flapper12]

Well it's not singled, but this might be a good Idea if you destroyed the turret, or cant figure out how it goes back together. http://nerfhaven.com...?showtopic=8458

My pvc doesn't fit together. They don't fit if you get what I'm saying I just want to single it. I have another at3k that I'm going to get new barrel material for
Ok butter I'll try that.

Edited by Flapper12, 28 May 2007 - 09:38 PM.

[Prometheus]

I think baghead had a singled AT3K mod on his site, wherever it is...

Edited by Prometheus, 28 May 2007 - 11:56 PM.

[Carrtoon]

I screwed up my first 3k also. It turned into my double shot 3k with the stock. Here are a few shots of it:





It was pretty awesome until the tank blew. After cutting off the top of the gun, it made it much easier to aim also. I've always hated that about the airtech series. Bulky and about impossible to aim accurately, especially with a coupler. After I cut half of the shell off, I filled in around the tank with hot glue and expanding foam to keep everything solid. You may also be able to see some more details in this pic:



Ignore the T connector. It was connected to the air stock...

[SirTofu]

You should really be hunting for a mod idea for a while until you make a post. Making 2 searches and then giving up is no effort at all. Pvc modding a turret won't work. However if you open up the at3k the mechanics should be fairly straightforward and since you would be removing the turret it should be quite easy to single.

[CustomSnake202]

As said before, PVC won't fit and it would be way too heavy for the turret to handle. For your other At3k, try using crayola barrels and larger brass to fit over them (because it sounds like 9/16 brass is too small for your darts). It's a shame to lose all of that rof.

Edited by CustomSnake202, 29 May 2007 - 03:00 PM.