Jump to content


Photo

Bbb Question

Is it possible too still fire missiles

8 replies to this topic

#1 CAP Blue Beret

CAP Blue Beret

    Member

  • Members
  • 72 posts
  • Location:Pacific Region of USA

Posted 23 May 2007 - 02:01 PM

I just got a Big Bad Bow from target, and love the range, but I want to make it fire micro darts. I used the search on here and google, and got some nice mods to do. However, I would still like to be able to fire missiles when I want to. Is this possible, or should I just forget about it?
  • 0
Check out NerfNation

#2 PointBlank

PointBlank

    Member

  • Members
  • 528 posts
  • Location:Chicago suburbia

Posted 23 May 2007 - 02:03 PM

Before I nested mine, I used sch40 1/2" pvc and it fired micros and arrows.
  • 0
You can agree with me.... or you can be wrong.

My Latest Mods
The Cyclops
Pointblank Titan

#3 commander erik

commander erik

    Member

  • Members
  • 92 posts
  • Location:Palos Heights, IL

Posted 23 May 2007 - 02:37 PM

Just bore out the stock barrel with a 11/16" spade bit. I recommend using a drill press to get it straight, through.
Then just ram your CPVC barrel into the stock one and shoot away.
If you bore out the hole straight enough, it works better than any coupler would.




I hate couplers. I can never get my barrels adjusted straight enough, and they always wobble around or fall off my blasters. That is why most of my mods involve doing something to the stock barrel and nesting something inside of it.
  • 0
USA

#4 bpso86

bpso86

    Member

  • Members
  • 618 posts
  • Location:NJ
  • State:New Jersey
  • Country:United States

Posted 23 May 2007 - 02:50 PM

Or you could always saw off the front part of the stock barrel, put on your cpvc, then replace the stock barrel part that you cut off over the cpvc when the time comes to fire arrows.
  • 0

#5 SM750

SM750

    Member

  • Members
  • 40 posts

Posted 23 May 2007 - 03:17 PM

Before I got CPVC I just shoved a crayola in the stock barrel and it worked with both arrows and stefans and stock micros. Also you can shoo stock megas out of the stock barrel. I will now probably use Commander Erik's idea.

Edited by SM750, 23 May 2007 - 03:19 PM.

  • 0
QUOTE
Also, stop being such a Jew and buy PETG from me.

#6 zoob

zoob

    Member

  • Banned
  • 37 posts

Posted 24 May 2007 - 09:10 AM

If you use 9/16 brass with nested 17/32 brass you can rap electrical tape around it and put (push or kind of screw) it into the already existant barrel. Then when you want to shoot rockets you have a removeable barrel.

#7 CrackerJak

CrackerJak

    Member

  • Members
  • 27 posts
  • Location:Essexville, Michigan

Posted 04 May 2009 - 08:34 PM

If you cpvc modded it, you can stick a coupler on the end of it. Just put the arrow on the coupler and shoot. Just make sure that your barrel isn't too long or the arrow won't go too far.
  • 0

#8 Gazoo

Gazoo

    Member

  • Members
  • 121 posts

Posted 05 May 2009 - 06:33 AM

All I did is put some E-tape near the bottom of some PETG and voila! You can fire micros when you want, or simply take out the barrel and you can fire missiles. Just make sure it's snug enough that your barrel doesn't fly out instead of the dart.
  • 0
QUOTE
groove- Blatant asshattery will not be tolerated

#9 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,761 posts

Posted 05 May 2009 - 10:40 AM

If you cpvc modded it, you can stick a coupler on the end of it. Just put the arrow on the coupler and shoot. Just make sure that your barrel isn't too long or the arrow won't go too far.

This topic is 2 years old. Please look at the date of the last post before replying. Anything that is inactive for more than a month or two does not really deserve any further replies from anyone other than the person that started the topic.
http://nerfhaven.com...?act=boardrules
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users