That is a pretty good idea but like one man clan said, you should use some different barreling material such as cpvc, petg, or brass. Any of these would work well.
Water Gun Too Nerf Gun
Started by Dayko, May 22 2007 07:55 PM
28 replies to this topic
#27
Dayko
-
- Members
- 1,037 posts
Member
Posted 04 June 2007 - 07:45 PM
Being new to modding is no excuse to not be able to figure out that you GLUE the coupler onto the gun.
seriously though, just glue it on there.
I didn't know if he meant too put the coupler on too the gun itself or too put some PVC on first then the coupler.
< One foot in death...The other in life. >
#28
frost vectron
-
- Members
- 526 posts
Member
Posted 04 June 2007 - 08:18 PM
It doesn't matter.
As long as half the coupler is attached to the gun (or attached to some PVC which is then attached to the gun) somehow, you're good.
The other half of the coupler (facing outwards) will be clean/empty so you can lock a barrel in place.
As long as half the coupler is attached to the gun (or attached to some PVC which is then attached to the gun) somehow, you're good.
The other half of the coupler (facing outwards) will be clean/empty so you can lock a barrel in place.
Edited by frost vectron, 04 June 2007 - 08:19 PM.
Latest Modification: The Professional
"I am a leaf on the wind--watch how I soar" - Hoban "Wash" Washburne, Serenity.
"I am a leaf on the wind--watch how I soar" - Hoban "Wash" Washburne, Serenity.
#29
Dayko
-
- Members
- 1,037 posts
Member
Posted 09 June 2007 - 02:33 PM
Should the PVC and the CPVC be a 1/2" inside the barrel?
< One foot in death...The other in life. >
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
