Longshot Question
#1
Posted 10 May 2007 - 06:35 PM
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#3
Posted 10 May 2007 - 06:56 PM
No, duct tape is useless for joints that need to be mechanically stable. Use a solvent adhesive, Fishin' Glue, or super glue to join the two halves after cutting them square and clean. If you don't have a tablesaw, bandsaw, or box mitre saw then you shouldn't attempt to combine magazines.since i just used duct tape, is it still dureable enough?
Edited by CaptainSlug, 10 May 2007 - 06:57 PM.
#4
Posted 10 May 2007 - 07:01 PM
will hot glue, and dust tape work, i dont have any of that fishing glue crap or anything like that.
I added like 5 layers of tape, slightly off topic, but do the replacement clips come with darts or do I have to use ultra stefans?
I use the saw on a gerber to cut it and the knife to even it, and the file to smooth it out, and I do not have any spare clips, that was a stupid decsision, those were my only clips, but it works.
Edited by nerfer909, 10 May 2007 - 07:08 PM.
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#5
Posted 10 May 2007 - 07:07 PM
Available damned near everywhere for a dollar or less under various brands but they're all based on cyanoacrylite.
#6
Posted 10 May 2007 - 07:10 PM
Edited by SHADOW HUNTER ALPHA, 10 May 2007 - 07:11 PM.
Founder of the Shadow Militia.
Founder of Nightshade Laboratories and The Nightshade Armament Corporation.
#7
Posted 10 May 2007 - 07:14 PM
And don't use it indoors. That's stuff is NASTY. It works, but I don't recommend it to anybody because it's far more toxic than the alternative (IPS Weld-On #3 or #4).just don't inhale it because it contains methylethylketone (MEK).
#8
Posted 10 May 2007 - 07:37 PM
Step 2: Drive to Toy Store.
Step 3: Buy a NF.
Blasphemy. I think you need to throw yourself against a wall, drive to store and buy yourself a brain.
#9
Posted 10 May 2007 - 08:58 PM
If you don't have a tablesaw, bandsaw, or box mitre saw then you shouldn't attempt to combine magazines.
Actually its pretty easy to make the clip with a dremel. You gust need to use some external supports to connect them together instead of connecting them directly.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users