![Photo](http://nerfhaven.com/forums/uploads/LOTR/lotr-gandalf2.gif?_r=0)
Modding Tagger Darts For Ls
#1
Posted 08 May 2007 - 09:06 PM
The Nerf Father
#2
Posted 08 May 2007 - 09:13 PM
All you need to do to make the Longshot compatible with 2-inch length stefans is get a paring knife or non-serated steak knife and insert it into the backside of the bolt (where you had to drill a hole to remove the restrictor).
Then while its blade is sitting against the frame supports of the peg use a hammer to lightly tap it until you've cut away the supports.
Smaller X-acto knives will work as well.
I didn't have any drill bits long enough and I avoid having to drill near thin plastic whenever I can help it.
Edited by CaptainSlug, 08 May 2007 - 09:15 PM.
#3
Posted 08 May 2007 - 09:15 PM
1. Clip off the top portion of the dart. (top half of the velcro head. You shouldn't be cutting foam right now.
2. peel back the remaining head, and pull it out away from the dart. This will expose a small, thin rod of plastic/rubber that goes into the foam. clip it off.
3. Now, there should be foam and what appears to be a cylinder that has a convenient BB size hole through the middle. put a bit of super glue in the hole, and stick in two BBs.(just enough so they go in)
4. Cap the dart off with a hotglue doam, or what ever your choice of tip is.
#4
Posted 08 May 2007 - 09:16 PM
I can give you a quick verbal, but have no pictures.
1. Clip off the top portion of the dart. (top half of the velcro head. You shouldn't be cutting foam right now.
2. peel back the remaining head, and pull it out away from the dart. This will expose a small, thin rod of plastic/rubber that goes into the foam. clip it off.
3. Now, there should be foam and what appears to be a cylinder that has a convenient BB size hole through the middle. put a bit of super glue in the hole, and stick in two BBs.(just enough so they go in)
4. Cap the dart off with a hotglue doam, or what ever your choice of tip is.
Hey thanks a lot
The Nerf Father
#5
Posted 08 May 2007 - 09:26 PM
#6
Posted 08 May 2007 - 09:51 PM
I can give you a quick verbal, but have no pictures.
1. Clip off the top portion of the dart. (top half of the velcro head. You shouldn't be cutting foam right now.
2. peel back the remaining head, and pull it out away from the dart. This will expose a small, thin rod of plastic/rubber that goes into the foam. clip it off.
3. Now, there should be foam and what appears to be a cylinder that has a convenient BB size hole through the middle. put a bit of super glue in the hole, and stick in two BBs.(just enough so they go in)
4. Cap the dart off with a hotglue doam, or what ever your choice of tip is.
I would not use super glue - it seems over-complicated and possibly damaging to the foam. Just sitck a dab of hot glue in first, then the 2 BBs, then the hot glue dome.
Again thx, 2 questions though....1.will these darts all work normal and in all guns?....2.what are range add ons with these specific addition to the dart?
The Nerf Father
#7
Posted 08 May 2007 - 10:45 PM
2: Depends on the gun, and the barrel, but anywhere from 10-30 feet with most stock barrels. That vaires a lot on your dart making skills, though.
#8
Posted 08 May 2007 - 11:03 PM
1: Yes, but you may have to shave off about 1/4" off in order for them to fit in the mav turret (and the FF, I think.)
2: Depends on the gun, and the barrel, but anywhere from 10-30 feet with most stock barrels. That vaires a lot on your dart making skills, though.
k thx man....although the only thing is for your ply to question 1...i cut that cross bar center piece outta the firefly so every dart fits in it without getting stuck.
The Nerf Father
#9
Posted 20 May 2007 - 05:24 PM
#10
Posted 20 May 2007 - 06:59 PM
#11
Posted 20 May 2007 - 07:19 PM
God has a sense of humor. But he doesn't particularly like ignorance.
Actually, I'm pretty sure God loves ignorance. Hence the Forbidden Apple which cast off Adam and Eve's ignorance, causing God to get really emo and kicked humanity out of Eden.
What a jerk.
Are you sure you should use 2 bb's, or is it different if you're trying to optimize it for the LS?
#12
Posted 20 May 2007 - 07:40 PM
Wise man always say, "Arguing on the internet is like winning the Special Olympics. Even if you win you're still retarded."
-Groove
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users