ok open the bbb up. it should look like this:
now, take the barrel out and take these out.
then saw/dremel a little bit off the barrelso the teeth things aren't there anymore.
ok, on to the barrel. I used this piece of brass:
ok, now cover the brass with two to three layers of electrical tape. then put it in the barrel like so:
(if you don't care about barrel extensions, stop here) ok, i used this:
(it is actually the original longshot barrel covered in a layer of e-tape)
now screw the bbb back together and you're done!
Edited by nerfispwnage243, 08 May 2007 - 09:25 PM.