Wtf!
#1
Posted 02 May 2007 - 06:46 PM
I put all screws back in. Since you have to take off the black cap for the battery compartment, that's what I did first. When I wanted to put the black thing in again, the screw won't go up or down... (i.e. I can screw it back in)
HELP!
My heatware username: terryma1215
#2
Posted 02 May 2007 - 06:49 PM
One man Clan:
I saw the Crossbow re-release on the shelf at my local Target, but I didn't want to tell anyone because I wanted them all to myself. I hid them all behind Dora the Explorer toys....
[/quote]
#3
Posted 02 May 2007 - 06:54 PM
#4
Posted 02 May 2007 - 07:18 PM
How am I suppose to put it back in?
My heatware username: terryma1215
#5
Posted 02 May 2007 - 07:20 PM
Just open the gun back up and look at the handle on the bottom. There should be a slot for it to fit into. Put the cap on the gun with it dissasembled if you need to to see where the screw goes to find the right position for the nut.
#6
Posted 02 May 2007 - 07:36 PM
You will have to undo a screw or two to get it in.
Edited by AJAQ, 02 May 2007 - 07:37 PM.
#7
Posted 02 May 2007 - 07:53 PM
The laser can sometimes be helpful. Like if you mod it good enough to reach the laser from 50 feet away. Or something like that.The same thing happend to me... I didnt really care because the lazer is pointless anyway.
#8
Posted 02 May 2007 - 08:04 PM
Second of all I would've gotten a pen with laser light, take it apart, use a pc board(circuit boards) and put in proper resistors and transistors.(soldering). But I ain't gon' to do it
My heatware username: terryma1215
#9
Posted 02 May 2007 - 09:38 PM
#10
Posted 02 May 2007 - 10:26 PM
#11
Posted 02 May 2007 - 10:46 PM
You'll take my life but I'll take yours too
You'll fire your musket but I'll run you through
So when you're waiting for the next attack
You'd better stand there's no turning back. The Trooper
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users