Jump to content


Photo

At2k Tank Potential Question


5 replies to this topic

#1 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 02 May 2007 - 04:58 PM

I have come up with a really good idea for one of of my mods. I will post a write up after I finish it and get it working properly. I want to know if a AT2K tank would have the potential to fire a ballistic ball a decent range out of a 6'' piece of 2'' PVC. If you need pictures of the pipe please feel free to ask.

~McFlurry
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#2 Retiate

Retiate

    Member

  • Members
  • 778 posts

Posted 02 May 2007 - 05:29 PM

How's the barrel fit with the ballistic ball and the barrel?
And I don't really thing an AT2K tank can fire a ballistic call very far... Maybe 20'-30' tops, depending on how good the barrel fit is.
I think you would be better off with a Titan or a homemade for shooting the ballistic balls. But I don't know exactly what your planning to do so I can't really say which would be best.

Edited by Retiate, 02 May 2007 - 10:14 PM.

  • 0

#3 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 02 May 2007 - 05:34 PM

How's the barrel fit with the ballistic ball and the barrel?


The barrel fits the ball pretty nicely theres only a VERY small space between the barrel walls and the ball. Just enough so that the ball won't be stuck in the barrel. Also I really dont feel like going out to spend 20$ on a gun that I'm just using the tank and the pump for. How would I make an effective homemade tank/pump to fire the balls at least 50'?

EDIT: The innards (AKA tank/valve/pump need to fit in the dead space of a longshot.)

Edited by Pvt.McFlurry, 02 May 2007 - 05:44 PM.

  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#4 Uncle Hammer

Uncle Hammer

    Member

  • Members
  • 750 posts

Posted 02 May 2007 - 07:57 PM

You can easily make a homemade tank/valve set up that will fit your needs. Just make sure you get a sprinkler valve or something so all the air comes out at about the same time.
  • 0
Don't mess with Texas cuz its bigger than France, bitch..
QUOTE (Talio)
Catagory 5 hurricanes are the mighty dick of God.  You don't mess with that!  You don't mess with Gods dick!

#5 PvtMcFlurry

PvtMcFlurry

    Member

  • Members
  • 353 posts

Posted 02 May 2007 - 08:12 PM

You can easily make a homemade tank/valve set up that will fit your needs. Just make sure you get a sprinkler valve or something so all the air comes out at about the same time.


Can you possibly re-direct me to a thread that has someone making something of that sort because I have searched and can't find anything that helps.
  • 0
QUOTE(Cannonball @ Oct 26 2007, 11:47 PM) View Post

I'm anxiously awaiting the hasbro over throw.

One Man Clan, or One Man Company?

Crossbow Mod.

#6 Uncle Hammer

Uncle Hammer

    Member

  • Members
  • 750 posts

Posted 02 May 2007 - 10:12 PM

If you want some sort of definitive guide, there isn't much. If you want something crude that you can adapt and make some modifications to, I would suggest looking at CXWQ'S bamf mod in the homemades section. It has a pretty good size tank attached to a sprinkler valve. The only mod you would need to do to it is either hook a pump up to it or use a tire valve and hook a compresser or bike pump to it.
  • 0
Don't mess with Texas cuz its bigger than France, bitch..
QUOTE (Talio)
Catagory 5 hurricanes are the mighty dick of God.  You don't mess with that!  You don't mess with Gods dick!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users