Jump to content


Photo

Target Blaster Modifications

Anyone Know of a good one?

5 replies to this topic

#1 NerfManiac

NerfManiac

    Member

  • Members
  • 214 posts

Posted 09 September 2003 - 05:29 PM

I know there was a big topic on Nhq about this already, But I question their integrity. I was wondering if anyone here had thought of any decent mods for the new gun. I'm not super smart when it comes to mods. In Fact, back on NO there was a 2 or so page article on the science of modifications that Death (I think) wrote... I didn't understand a bit of it. Anywho does any-one know of anymods for this one. Post your results...etc
  • 0
You use your tongue prettier than a twenty dollar whore.
- Taggart (Blazing Saddles)

#2 Famine

Famine

    Member

  • Members
  • 545 posts

Posted 09 September 2003 - 07:22 PM

I haven't gotten one yet but I would think that modding it with a brass barrel for micro darts would improve range and accuracy. I'm sure once CX gets one he'll figure out if telescoping or straight works best. Since the gun is spring powered I'm going to venture a guess and say to try a telescoping brass barrel with maybe a spring enhancement or rubber bands (bands seem to be going out of style but fuck it, they work).
  • 0
~Famine
of Mag-7
East Coast Nerf 2005: Step It Up.
East Coast Nerf 2006: That's more like it.
East Coast Nerf 2007: I'm not driving to Massachusetts again.
East Coast Nerf 2008: Day of Regret.
East Coast Nerf 2009: Quid pro quo, douchebags!

#3 One Man Clan

One Man Clan

    TOFTS

  • Contributors
  • 2,170 posts
  • State:New Jersey
  • Country:United States

Posted 09 September 2003 - 11:13 PM

Bands should hopefully work best b/c stretching the spring on this gun is damn near impossible. I used PVC on mine with about an 8 in barrel and I'm getttin around 50' with zeros. It's about as good as my LnL's.
  • 0
I hate you.

#4 ickypootoy

ickypootoy

    Member

  • Members
  • 18 posts

Posted 10 September 2003 - 06:11 AM

I also used pvc with mine (about 4 in.) but then I stuffed a crayola barrel down the pvc and now it goes about 70 ft with good red mini's.
  • 0
"GIR: Thats when the giant squirrel showed up.
Zim:GIR!
Host:Let her talk!Can't you see she is upset!Now, don't you mean dib showed up?
GIR:No. The squirrel showed up first. Then dib showed up. Then the squirrel ate dibs greasy head.And then the squirrel flewwwww away." - Invader Zim

#5 NerfManiac

NerfManiac

    Member

  • Members
  • 214 posts

Posted 10 September 2003 - 09:36 AM

Ok I just modded mine last night and here's what I did.
1. I detached the barrel and taped up all of the holes.

2. I removed the air restrictor in the back of the barrel.

3. I put a 1 in piece of size 17/32 brass over the little nub that you see (an extremly tight fit, so I sought no use for epoxy)

4. I got a 4 in piece of 9/16 brass and put a few layers of duct tape around it and hot glued it into the original barrel.

5. Close it up and add bands if you feel necessary.
  • 0
You use your tongue prettier than a twenty dollar whore.
- Taggart (Blazing Saddles)

#6 leftnut

leftnut

    Member

  • Members
  • 392 posts

Posted 10 September 2003 - 02:04 PM

I stuck 4in of brass on it, fits right on and gets more than 60ft.
  • 0
"You are obviously a megalomaniacal insecure little boy stroking your faltering ego with your own hairy palm in order to prove your suedo-alpha male status..."
-BadAssReptileFarmer to Talio


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users