Jump to content


Photo

Easy Integrations

simple blaster=cram, cram CRAM!

5 replies to this topic

#1 Ares

Ares

    Member

  • Members
  • 166 posts

Posted 09 September 2003 - 02:21 PM

Whta do YOU think is the easist gun to integrate into another shell, or the best shell? I mean, take a secret shot 2. That is one SIMPLE pump gun. You could cram two of these into just the front bottom of a crossbow-even with the original crossbow pieces still in..........idea, heh.....
  • 0
The Greek God of War
Unseen

#2 rawray7

rawray7

    Member

  • Members
  • 549 posts

Posted 09 September 2003 - 08:54 PM

the only problem with the secret shot two is that, while it's simple, it's air chamber is the size of alaska, making it a pain to put anywhere.
  • 0
You, nerfboi, are the suckest gun. -neonerfer

#3 NerfManiac

NerfManiac

    Member

  • Members
  • 214 posts

Posted 09 September 2003 - 10:35 PM

My guess would either be the Crossbow or the BBB. Another thing that makes the SS2 a bit of a problem is it's rather touchy check valve.
  • 0
You use your tongue prettier than a twenty dollar whore.
- Taggart (Blazing Saddles)

#4 Wax

Wax

    Member

  • Members
  • 68 posts

Posted 10 September 2003 - 01:11 AM

I much prefer the SM1500 for integrations, because it is even simpler than the SS2. You pump it, you pull the pin. Bam. That's all there is. The SS2, you pump, you pull the trigger, which pushes the valve, which releases the air. Yeah. Granted, the SS2 probably gets more range than the 1500, if modded correctly, but the simplicity of the 1500 makes it my favorite. Acually, I'm in the process of putting a 1500 with the barrel assembly and a single barrel 1500 into a Vortex Tornado shell. It's almost done, after having sat on my floor for 6 months. Oh well, I'll get around to it sometime.

Oh yeah, the SM 750 is also good, and is smaller than the 1500.
  • 0
Wax in the Nerf universe, wax4213 everywhere else.

#5 leftnut

leftnut

    Member

  • Members
  • 392 posts

Posted 10 September 2003 - 02:23 PM

The sm1500 wasn't all that hard to put into the casing of a first shot so I am going with the sm1500.
  • 0
"You are obviously a megalomaniacal insecure little boy stroking your faltering ego with your own hairy palm in order to prove your suedo-alpha male status..."
-BadAssReptileFarmer to Talio

#6 Ares

Ares

    Member

  • Members
  • 166 posts

Posted 10 September 2003 - 05:25 PM

I put a secret shot two into the back part of a casing of a bb, with the pump in it's sight, and the valve on the back stock, running throuh a hole tot he barrel via garden hos. It's awful looking, and not that good(nice for indoors), but its unique. i wanna stick some into my crossbow but ran out of secret shot 2's that would work, and i hate to take apart all the work i did on the bbb(not a bb anymore). If i had more, id stick one in my crossbow, two on my crossbow, two in my manta ray casing, copper barrel most,wtc. Maybe i can use an at2k. Speaking of the crossbow, how do you revitalize an old crossbow? I modded mine 5 times, and its started to wind down and lose its thrill.
  • 0
The Greek God of War
Unseen


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users